Swipe or use the arrows to view product images.
Come-Along 50-150mm Grip Pull & Tension Unsheathed
| Price | $1.00 |
|---|---|
| Min Order | 1000 Pieces |
| Availability | In Stock |
| Shipping From | Hubei, China |
| Popularity | 516 people viewed |
Model NO.:
50-150mm
Technics:
Welding
Standard:
GB
Usage:
Line Fittings
Type:
Link Fittings
Trademark:
Oeipower
Transport Package:
Carton
Specification:
copper aluminium
Origin:
China Nangyang
HS Code:
73269090
Product Description
STRAIN CLAMPS CLEVIS PISTOL (GUN) ACSR 50MM2 COMPLETE
WITH 3 U-BOLTS
Cast steel hot dip galvanised
The minimum failing load shall be indelibly marked on
each Pistol clamp.
Come along suitable for gripping ACSR conductor and metal rods
Aluminum alloy wire grip
TYPE:APG-B4
NAME:Parallel groove clamp APG-B4
Specification
Al 25-240mm² Size 62*58mm Double-bolts Bolt M10*60 Weight 280g
WITH 3 U-BOLTS
Cast steel hot dip galvanised
The minimum failing load shall be indelibly marked on
each Pistol clamp.
Come along suitable for gripping ACSR conductor and metal rods
Aluminum alloy wire grip
TYPE:APG-B4
NAME:Parallel groove clamp APG-B4
Specification
Al 25-240mm² Size 62*58mm Double-bolts Bolt M10*60 Weight 280g
| 3.6 | The throat of the staple will present a diameter range | mm | 26.42 | |||||||
| 3.7 | Throat Suspension Clamp support must have curvature, to allow an angle of entry and exit from the driver, | º | 30º | |||||||
| 3.8 | Suspension clips present a breaking load | kg | 11,340 | |||||||
| 3.9 | Minimum weight of zinc deposited in the hot galvanized steel | g/m² | 915 | |||||||
| 3.10 | Minimum weight of zinc deposited in bolts, nuts and washers | g/m² | 400 | |||||||
| 3.11 | Dimensions and drawings | mm | yes | |||||||
| 3.12 | ASTM standards | ASTM 123/153 | ||||||||
Material
Connector bodies made of corrosion resistant, high strength aluminum alloy 99.5
Bolts: DIN 933, steel 8.8, dacromet; Nut: DIN934, dacromet, pressed into lower part
Pressure pad: aluminum alloy; Spring washer: DIN127, steel
Conical washer/Spring washers: Steel, DIN6796 corrosion-protected, dacromet
| 4.3 | The body material will be alloy of aluminum, bolts, washers and nuts of the fastening system of the staple will be hot dip galvanized forged steel | yes | ||||||||
| 4.3 | ACSR 556 conductor diameter. 4MCM not including the rod | mm | 23.54 | |||||||
| 4.5 | Breaking load | kg | ||||||||
| 4.6 | The compression type anchor clips for the conductor must be supplied with a connection terminal that can be bolted | 0° o 30°. | ||||||||
| 4.7 | Weight of zinc deposited on steel | g/m² | 915 g/m². | |||||||
| 4.8 | Zinc weight deposited on bolts, nuts and washers | g/m² | 400 g/m². | |||||||
| 4.9 | Weight | kg | ||||||||
| 4.1 | Dimensions and drawings | yes | ||||||||
| 4.11 | ASTM standards | ASTM 123/153 | ||||||||
| 4.12 | Attach to the staple | Norma IEC 60471. | ||||||||
Stainless steel A2 bolts and nuts available according to order.
| 6.3 | The construction material of the splice must be aluminum and aluminum alloy must contain a maximum of 0.1% copper | yes | ||||||||
| 6.4 | ACSR conductor section 556.4MCM | mm² | 327.93 | |||||||
| 6.5 | Length | m | ||||||||
| 6.6 | Breaking load | kg | ||||||||
| 6.7 | Repair splices for the conductor must be preformed rods of the Armor Splice Full type Tension." | yes | ||||||||
| 6.8 | Each rod that forms the joint must have a mark in its center with indelible ink | yes | ||||||||
| 6.9 | Weight per unit | kg | ||||||||
- Similar Products
$2.00
100 Pieces (MOQ)
Y-Clevis Metal Accessories for Insulator
Yangzhou Ze Jia International Trade Co., Ltd.
$3.00
1000 Pieces (MOQ)
Low Carbon Steel Bonded Earthing Ground Rod Without Thread
Wenzhou Broscoo Electric Co., Ltd