Negotiable
100 Pieces (MOQ)
High Head Filtered Effluent Pump 10gpm 20gpm 30gpm 1/2HP 115V/60Hz
Zhejiang Dayuan Pumps Industrial Co., Ltd.
Swipe or use the arrows to view product images.
Complete Set of Pry Mounted Vertical Direct Connected Single-Stage Pipeline Centrifugal Fire Pump
| Price | $4200.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Jiangxi, China |
| Popularity | 317 people viewed |
Model NO.:
XBD-L
After-sales Service:
Engineers Service
Warranty:
One Year
Max.Head:
>150m
Max.Capacity:
>400 L/min
Driving Type:
Motor
Material:
Cast Iron
Structure:
Single-stage Pump
Assembly:
Pipeline Pump
Power:
Electric
Start Up:
Electric Pump
Type:
Centrifugal Pump
Application:
Fire Pump
Industry:
Fire Pump
Media:
Water
Performance:
Fire Pump
Theory:
Centrifugal Pump
Speed:
3000
Seal:
Mechanical Seal
Trademark:
Dashuixiong
Transport Package:
Standard Wooden Box
Specification:
500*500*500
Origin:
Wen Zhou China
Product Description
XBD vertical single-stage fire pump set is based on our IS type pump, combined with the characteristics of foreign pipeline pump, optimization design and manufacture of a new generation of products by itself. Use of fire hydrants in the water, feeding sprinkler system water supply in other occasions cleaning liquid.
Conditions of use:
Conditions of use:
1. XBD vertical single-stage fire pump set is used for transporting ambient water.
2. The water does not contain corrosive substances and solid particles.
3 Minimum working pressure 0.3Mpa, the maximum working pressure of 1.6 Mpa.
Characteristics of XBD vertical single-stage fire pump products
4, the pump is a vertical structure, import and export of the same caliber, and are in the same center line, as the valve can be installed in the pipeline, compact appearance, small occupation area, low construction inputs, such as protective cover can be placed outdoors
5, the impeller mounted directly on the motor lengthened shaft, short axial dimensions, compact structure, pump and motor bearings reasonable configuration, can effectively balance the pump running the radial and axial load, so as to ensure the operating balance vibration noise of the pump is very low.
6, seal mechanical seal mechanical seal or a combination, the use of imported titanium alloy seal ring, medium and high temperature mechanical seal with cemented carbide materials, wear-resistant, can effectively increase the service life of mechanical seal.
Performance requirements of fire pump is:
1. Maximum flow fire pump shall be 150% of the value of the design, the head is not less than the selected operating point of 65% lift, lift off the pump when not greater than the selected operating point of 140% lift, pump flow 1 2LS, head 1.1 - 1.2 times the fire pump lift.
2. At the same time in the fire pump outlet pipe should be located on measurement flowmeter, flow meter should be able to test 175% of the pump flow rate selected, fire pump pressure gauge set should be greater than 89mm in diameter at the outlet pipe.
- Similar Products
Negotiable
10 Pieces (MOQ)
Powerful 4sj 8t Submersible Deep Well Pump with High Flow Rate
Zhejiang Lishiba Pump Co., Ltd.
$1000.00
10 Pieces (MOQ)
150 Meters Solar Deep Well Water Pump
Zhejiang Hans Pump Industry Co., Ltd.