Menu
Suppliers Products
Global B2B sourcing platform
Verified suppliers and manufacturers
MadeInChina.com > Products > Manufacturing & Processing Machinery > Other Manufacturing & Processing Machinery
Swipe or use the arrows to view product images.

Copper Wire Aluminum Extrusion Machine for Wire Making Production

Price $90000.00
Min Order 1 Set
Availability In Stock
Shipping From Shanghai, China
Popularity 484 people viewed
Send Inquiry View Full Page
Model NO.:
TJ550A
Wheel Diameter:
550mm
Main Motor:
400kw/1000rpm
Rotation Speed:
1-8 Rpm
Rod Diameter:
22 mm 0.2 mm
Tensile Strength:
<170n/ mm2
Maximum Cross Sectional Area:
400mm2~6000mm2
Maximum Width:
280 mm (or 90mm Rod)
Output:(Average):
2300kg/H
Spooler Flange:
2000~2500mm
Power Supply:
AC 380 V, 3 Phase, 50 Hz,
Compression Air:
0.7MPa, 2m3/Min
Loop Cooling Water:
>0.3MPa, 100m3/H
Space:
45m X 10m
Chambers:
1,2,3,Each One
Model:
Tj550A
Trademark:
Senerge
Transport Package:
Standard Packing
Specification:
45m X 10m
Origin:
Zhejiang
Product Description

TJ550A Continuous Extrusion Machinery

Specifications
a. Specification of TJ550A Machinery:
Wheel Diameter:                      550mm
Main Motor:                             400KW/1000rpm           
Rotation Speed:                        1-8 rpm
b. Feedstock
Material: Clean of up casting copper rod
Rod Diameter:                          22 mm± 0.2 mm
Tensile strength                         <170N/ mm2
c. Product
Maximum Cross Sectional Area:   400mm2~6000mm2             
Maximum Width:                          280 mm (or 90mm rod)
Output:(average)                          2300Kg/h
Flash level: (depending on section area and normal tooling)      3-6%
Spooler Flange:                            2000~2500mm                
d. Plant Requirement
Power Supply:                         AC 380 V, 3 Phase, 50 Hz, 550KVA
Compression Air:                      0.7MPa, 2m3/min
Loop Cooling Water:                >0.3MPa, 100m3/h
Space:                                     45m X 10m

The structure of the machine is the grooved wheel and shaft assembly. The main shaft is driven by an infinitely variable, thyristor-controlled DC electric motor, via an epicyclical gearbox. The power output envelope from the drive is matched to the production rates specified by operator. There are mount roller bearings that incorporate multiple seals to retain oil and prevent the ingress of foreign material.
The Coining roll assembly to coin the feed rod firmly in the wheel groove.
The shoe contains the die-chamber assembly can be opened and closed easily by hydraulic cylinder, high pressure cylinder used to support the shoe in working position. With supplement tooling, the extrusion wheel of the machine can be replaced easily. Exchange chamber and die is also very fast.







  • Similar Products
Full Page Contact Supplier
↑