Swipe or use the arrows to view product images.
Custom Microporous Adhesive E-PTFE Acoustic Vent Waterproof Membrane for Speak with SGS/Ios
| Price | $0.04 |
|---|---|
| Min Order | 5 Pieces |
| Availability | In Stock |
| Shipping From | Fujian, China |
| Popularity | 467 people viewed |
Membrane Type:
Vent Membrane
Type:
Gas-permeable membrane
Power:
Hydraulic
Custom Order:
OEM, ODM, Obm
Water Entry Pressure:
-120mbar(>1m)
Operation Temperature:
-40~125
IP Rate:
IP65/ IP66/IP67/ IP68/ IP69
Oil Rate:
6
Material:
Eptfe/Eptfe
Membrane Character:
Waterproof and Breathable
Thickness:
0.4mm
Trademark:
TMZC38065223D01T200308
Transport Package:
Plastic and Carton
Origin:
Fujian
Product Description
Product Name | Portable Electronics Waterproof Breathable Acoustic Vents Membrane for Speaker |
Material | ePTFE |
Application | Cell phone;Smart phone;Portable media players etc. |
Color | Black and White |
Physical Properties | Dustproof,Waterproof,Oleophobic |
Seepage Water Pressure | ≥ 350mbar for 60 seconds |
Working Temperature | -40ºC -100ºC |
IP Rate | ≥IP67 |
Air Perm | >1.4L/Hr/cm²@12 mbar |
Transmission losss 3000Hz | <2dB |
Thickness | 0.07mm |
Membrane Vents
Customization: SPIDER Tech's protective vents can be customized to match your products in spec., color, property and we can provide you with specific solutions. For more information, please contact us freely.
Don't hesitate to contact us at anytime, no matter inquiry, TM message, via email or skype. If we are online,we will reply you at once. Even if sometime we are not online because of time difference, we promise you will be replied within 8 hours.
1) Use tweezers place the adhesive tape on the surface of the counterbore, and then press the patch against the mounting surfaceedge .
2) Press the rim after the adhesion for about 1.5s ;Don't make any move on the membrane after adhesion until 24 hours.
Attention:Ensure that the enclosure's mounting surfaces are smooth, clean and free from oils, particles or other contaminants;
Ensure that the enclosure's mounting surface is dry prior to vent installation.
Ensure that the enclosure's mounting surface is dry prior to vent installation.
What is SST-Porous Adhesive & BD GOO series Waterproof venting?
1.