Swipe or use the arrows to view product images.
Customized NBR FKM EPDM HNBR Neoprene Silicone Sb-Type Rotary Shaft Oil Seal
| Price | $9.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Guangdong, China |
| Popularity | 258 people viewed |
Model NO.:
SB
Material:
NBR
Usage:
Engine, Transmission, Rear Axle
Type:
Haplotype
Speed:
High Speed
Pressure:
Pressure Type
Lip:
Single Lip
Standard:
Standard
Color:
Black, Brown, or as Your Request
Hardness:
30-90 Shore According to Work Environment
Working Medium:
Hydraulic Oil, Water and Dust
Application:
Mechanical Equipment. Automotive, Construction
Trademark:
NextGen Tech
Transport Package:
Carton or as Your Required
Specification:
All STandard OD*ID*H, Customized
Origin:
Guangzhou, China
HS Code:
4016931000
Product Description
Oil seal is also known as shaft seal. They are often called grease, fluid or dirt seals. Oil seal is an integral part in any rotating and moving part assembly. They close spaces between stationary and moving components in mechanical equipment. In most applications, the seal is either partially or temporarily immersed or is simply exposed to splashing lubricant, particularly in engines, transmissions, gearboxes or axles. They are vital components of almost every type of machine and vehicle in operation. An oil seal normally consists of three basic components: The Sealing Element (the nitrile rubber part), the Metal Case, and the Spring. It is a widely used sealing component. The function of a seal is to prevent the leakage of medium along the moving parts. This is mainly achieved by the sealing element.
Oil Seal Cross Reference
1.Our price:
Our price is not the lowest one, but compared with the same quality level product,ours is the best one.
2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.What can you buy from us?
Kind: Oil Seals,O-ring, Rod/Piston seal, Gas seal, Guide elements, Large sized Seals Customized Seals.
Material: NBR/EPDM/FKM/Silicone/HNBR/PU
4. Shipping:
Quickly delivery, with several delivery ways, such as DHL/FEDEX/UPS/TNT express, Air and Ocean shipping way. We have several express accounts and can help you save cost.
5, About customized Service:
Drawings or samples, it is enough. We can produce colored rubber seal just based on your drawing or samples with kinds of colors. We also can give the professional advice based on your requirement.
Oil Seal Cross Reference
SB-Type
The SB profile is a shaft seal composed of a single external metal cage with an internal rubber coating and a primary sealing lip with integrated spring. This type is not recommended for use in heavy polluted environments.
| Technical data | ||||
| Temperature | -40°C / +200°C Depending On Rubber Material | |||
| Pressure | Up to 0.05 MPa | |||
| Speed | Up to 25 m/s | |||
| Medias | Mineral and synthetic lubricants (CLP, HLP, APGL etc.) | |||
| Material | Rubber: NBR/FKM/HNBR Metal Insert: Carton Steel Spring: Carton Steel | |||
| Advantages | Good radial rigidity, particularly for large diameters Good stability when assembled, preventing the bounce-back effect Suitable for use in combination with axial seal(V-rings) Modern primary sealing lip with low radial forces | |||
| Applications | Pumps, Electrical motors Transmission systems (e.g. gearboxes) Machinery industry (e.g. tool machines) Heavy Engineering Application | |||
To provide effective sealing, radial shaft seals must be installed properly. An experienced installer with suitable tools, working in a clean environment, is recommended to provide proper installation. To facilitate seal installation and to achieve initial lubrication, prior to installation, NextGen Tech recommends wiping the shaft and seal with the lubricant that is going to be retained. While the outside diameter of metal-cased seals can be lightly lubricated to ease installation, the outside diameter of rubber covered seals should always be lubricated.
Seals with an auxiliary, contacting lip can also be filled with grease between the sealing lip and auxiliary lip to reduce frictional moment. This does not apply to silicone rubber seals and seals with hydrodynamic features.
Sealing Mechanism of Oil Seal
1.Our price:
Our price is not the lowest one, but compared with the same quality level product,ours is the best one.
2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.What can you buy from us?
Kind: Oil Seals,O-ring, Rod/Piston seal, Gas seal, Guide elements, Large sized Seals Customized Seals.
Material: NBR/EPDM/FKM/Silicone/HNBR/PU
4. Shipping:
Quickly delivery, with several delivery ways, such as DHL/FEDEX/UPS/TNT express, Air and Ocean shipping way. We have several express accounts and can help you save cost.
5, About customized Service:
Drawings or samples, it is enough. We can produce colored rubber seal just based on your drawing or samples with kinds of colors. We also can give the professional advice based on your requirement.
- Similar Products
$2.00
100 Pieces (MOQ)
75*95*8mm and 75*95*12mm Oil Seal Kit for MB Truck K004061/26-E62
Xingtai Huayou Rubber Co., Ltd.