Swipe or use the arrows to view product images.
Customized Non-Standard Stainless Steel Brass Plastic Plunger Tube and Magnetic Iron Core Pulse Valve Pneumatic Normal Close Open Solenoid Valve Armature
| Price | $10.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Zhejiang, China |
| Popularity | 486 people viewed |
Model NO.:
TB
Media:
Cleam Air
Temperature:
Ordinary Temperature
Actuator:
Electric
Connection Form:
Thread
Type:
Pilot Operated
Material:
Cast Aluminium
Pressure:
Ordinary Pressure
Valve Structure:
Pilot Membrane Structure
Power Supply:
AC & DC
Usage:
Safety, Emptying, Drain, Temperature Control, Flow Control, Jetting
Standard:
GB
Application:
Industrial Usage, Dust Collection
Designing Pressure:
0..035-0.8MPa
Working Pressure:
0.3-0.6MPa
Ambient Temperature:
-15---60celsius
Working Medium:
Clean Air
Relative Humidity:
<85%
Protection Class:
IP65
Diaphragm Material:
Nitrile
Diaphragm Life:
Over One Million Cycles
Certification:
Ce ISO
Trademark:
Smart
Transport Package:
PP
Specification:
PC
Origin:
China
HS Code:
84818040
Product Description
Customized Non-Standard Brass Stainless Steel Pneumatic Solenoid Valve Armature
We can do OEM or ODM for all kinds of customized armatures and coils.
Usage:
Electro-magnetic valve (also called diaphragm valve) is the "switch" for compressed air in the dust clean blowing system of the pulse bag filter. Controlled by the output signals of the pulse jet control device, it makes dust clean to the filter bags cell by cell to keep the resistance of the baghouse within the set range and thus guarantee the processing functions and the dust-collecting efficiency of the baghouse.
Y type electro-magnetic pulse valves are embedded valves (also called submerged ones) which are directly installed on the manifold box. They have better flow characteristics and operate with reduced pressure loss, therefore, they are suitable for conditions where the pressure of the gas source is relatively low.
Z type electro-magnetic pulse valves is a right-angle valve, with the 90 degree angle between the inlet and outlet, which is suitable for the installation connection between the gas dome and the baghouse blow tube to provide good air flow and dust clean pulses satisfying the requirements.
DD type(with 2nuts) electro-magnetic pulse valves are the right-angle valve same as Z type which is suitable for the installation connection between the gas dome and the baghouse blow tube. There are fixed nut at both ends which make it easy to install and use the valve.
ZT type electro-magnetic pulse valves are the straight valve inline, with the 180degree angle between the inlet and outlet, which is suitable for the installation connection between the inlet and gas dome, outlet and the blow tube to provide good air flow and dust clean pulses satisfying the requirements.
Working Principle:
The electro-magnetic pulse diaphragm valve is composed of two gas cells. When the compressed air is connected, it comes into the back gas cell through the orifice. The pressure in the back gas cell pushes the diaphragm closely against the outlet of the valve and the electro-magnetic valve stays in the "closed" condition. The electrical signals from the pulse jet control device move the armature of the electro-magnetic pulse valve. The air escape of the back gas cell opens and the back gas cell loses pressure quickly, thus the diaphragm moves back and the compressed air blows through the valve outlet. The electro-magnetic pulse valve comes into the "open" condition. When the electrical signals from the pulse jet control device disappear, the armature of the electro-magnetic pulse valve returns to its original position. The air escape of the back gas cell closes and the pressure in the back gas cell rises, which pushes the diaphragm closely against the valve outlet. The electro-magnetic valve comes into its "closed" condition again.
We can do OEM or ODM for all kinds of customized armatures and coils.
Usage:
Electro-magnetic valve (also called diaphragm valve) is the "switch" for compressed air in the dust clean blowing system of the pulse bag filter. Controlled by the output signals of the pulse jet control device, it makes dust clean to the filter bags cell by cell to keep the resistance of the baghouse within the set range and thus guarantee the processing functions and the dust-collecting efficiency of the baghouse.
Y type electro-magnetic pulse valves are embedded valves (also called submerged ones) which are directly installed on the manifold box. They have better flow characteristics and operate with reduced pressure loss, therefore, they are suitable for conditions where the pressure of the gas source is relatively low.
Z type electro-magnetic pulse valves is a right-angle valve, with the 90 degree angle between the inlet and outlet, which is suitable for the installation connection between the gas dome and the baghouse blow tube to provide good air flow and dust clean pulses satisfying the requirements.
DD type(with 2nuts) electro-magnetic pulse valves are the right-angle valve same as Z type which is suitable for the installation connection between the gas dome and the baghouse blow tube. There are fixed nut at both ends which make it easy to install and use the valve.
ZT type electro-magnetic pulse valves are the straight valve inline, with the 180degree angle between the inlet and outlet, which is suitable for the installation connection between the inlet and gas dome, outlet and the blow tube to provide good air flow and dust clean pulses satisfying the requirements.
Working Principle:
The electro-magnetic pulse diaphragm valve is composed of two gas cells. When the compressed air is connected, it comes into the back gas cell through the orifice. The pressure in the back gas cell pushes the diaphragm closely against the outlet of the valve and the electro-magnetic valve stays in the "closed" condition. The electrical signals from the pulse jet control device move the armature of the electro-magnetic pulse valve. The air escape of the back gas cell opens and the back gas cell loses pressure quickly, thus the diaphragm moves back and the compressed air blows through the valve outlet. The electro-magnetic pulse valve comes into the "open" condition. When the electrical signals from the pulse jet control device disappear, the armature of the electro-magnetic pulse valve returns to its original position. The air escape of the back gas cell closes and the pressure in the back gas cell rises, which pushes the diaphragm closely against the valve outlet. The electro-magnetic valve comes into its "closed" condition again.
What Is Directional Valve?
One of the most fundamental and important components of any fluid power system is the directional-control valve. As the name suggests, directional control valves are used to direct the flow of fluid through the system. Directional control valves control when and where the fluid in the system flows.
We will always try to give you smart solution for your automatic systems.
Smart Pneumatic Co., Ltd have a professional team, some of them have working experience in big pneumatic companies, like FESTO China SMC China, China AIRTAC, China EMC and etc, so we are familiar with their products and their supplying chain system.
In the future, Smart Pneumatic will continue follow the core concept "Always Smart Solution" to serives our customers; We will do more products and service innovation, create more value for customers, lift efficiency for their production.
- Similar Products
$0.98
100 Pieces (MOQ)
Od 9mm 3/2 Way Flange Type Nc Solenoid Armature
Ningbo Beris Electronic Co., Ltd
Negotiable
5 Pieces (MOQ)
Normally Open 2way 12VDC Base Mounted on/off Solenoid Valve
Shenzhen Keyto Fluid Technology Co., Ltd.
$6.00
3000 Pieces (MOQ)
Sterilizer Solenoid Valve Qf0937-12A30 Bistable Solenoid
DongGuan Dason Electric Company