DC24V DC Electromagnet Push-Pull Solenoid Dsn-1240s Series

Main product parameters:

1. Name and model (P/N): bs-1240s -30, pull-pull electromagnet produced and sold by bo shun

2. Standard TEST:

2.1 the environment temperature (temperature range) : - 20 ºC ~ + 45 ºC

2.2 relative humidity :5% ~ 60%RH

2.3 rated voltage :DC24V

Power (wattage) : 2.4 4.2 W (DC24V, R = 137 Ω + / - 10%)

2.5 PERATION CYCLE: on/off =30mim :5mim(continuous power frequency ED 100%)

3. (facies) appearance: no damage, rupture, rust, surface stains

4. ELECTRICAL characteristics

4.1 working voltage :DC24V plus or minus 10%

4.2 power (potence) : 6 mm thrust: acuity 1.5 N (DC24V)

4.3 insulation resistance (insulation to hold) : DC500V, 50 m or higher Ω (between the coil and skeleton)

4.4 high voltage: DC700V 50/60hz-1 second, with maximum leakage current of 1 milliampere (between the coil and the casing)

5.0 life (biometry): more than 300,000 times in normal use.

Drawing of push and pull electromagnet products:
Our company has passed the ISO9001 certification, has the skilled strict quality consciousness, the skilled operation staff, the advanced testing equipment and the excellent research and development personnel, welcome to the sample & to the drawing processing, we are good at non-standard customization