Dbg-105 Dbg-104 Dbg-103 Disk Type Pneumatic Disc Brake

Factory Directly Produce Air Disc Brake,Pneumatic Disc Brake(Pneumatic Applied/Sprig Release Brake)

Pneumatically Applied Brakes are best suited for light to medium stopping duties and for tensioning applications where a high degree of control is required.Pneumatic Disc Brakes are widely used for speed reducing, stopping/braking of the low or medium torque driving mechanism. The brakes can also be applied as tension brake on winding machineries, such as: paper-web tension control, news paper publishing tension control, steel unwind control, wire and cable reel unwind tension etc.

Catalogue

Features for Pneumatic Applied Brakes Include:

• Compact structure and small size, light. It is easy to control and operate.
• Normally-closed type: spring applied and pneumatically released; Normally-opened type, air pressure applied and spring opened, brake force can be adjusted by varying air pressure.
• The pneumatic actuator is made in Taiwan with high reliability and quality.
• The linings are of inserting installation style and non-asbestos. It can be easy replaced.

When it is not possible to apply a disc with a required diameter, it is enough to apply more than one clamp.

This type of brake is also very suitable in case that work involves a constant pull on the material, but a pressure regulator is required.The assembly of these brakes does not require any particular attention thanks to the new self-aligning system with orthogonal sliding which allows an automatic brake-disc alignment.

The Schematic Diagram of powder brake,tension control, web guide system and other parts on equipment.