Swipe or use the arrows to view product images.
Diameter 12.7mm Long 2.5m High Temperature Mechanical Cold Drawn Steel
| Price | $970.00 |
|---|---|
| Min Order | 1 Ton |
| Availability | In Stock |
| Shipping From | Hebei, China |
| Popularity | 293 people viewed |
Model NO.:
Diameter 12.7mm Long 2.5m
After-sales Service:
Processing Service
Processing Technology:
Cold Drawing
Tensile Strength:
≥600MPa
Yield Strength:
≥355MPa
Elongation:
≥16%
Percentage of Contraction:
≥40%
Impact Toughness Value:
≥39j/Cm²
Surface Roughness:
Ra0.8μm-Ra3.2μm
Material:
Ck45
Trademark:
GX
Transport Package:
Wooden Box/Hollow Plat
Specification:
Diameter 12.7mm Long 2.5m
Origin:
Shijiazhuang
HS Code:
7214100000
Product Description
| Material | C | Si | Mn | P | S | Cr | Mo | Ni |
| CK45 | 0.42%~0.50% | ≤0.40% | 0.50%~0.80% | ≤0.035% | ≤0.030% | ≤0.40% | ≤0.10% | ≤0.40% |
| 1215 | ≤0.09% | ≤0.10% | 0.75%~1.05% | 0.04%~0.09% | 0.26%~0.35% |
Cold drawn round steel is a high quality metal material made by cold drawing process. It is made of hot-rolled round steel as billet, which is drawn by strong force at room temperature through a specific mold, so that the diameter of the round steel is accurately reduced. This process gives it many advantages: high dimensional accuracy and precise control of diameter deviation to meet the needs of precision manufacturing; The surface is very smooth, low roughness, reduce the subsequent grinding process; Due to the cold hardening effect, the strength and hardness are significantly improved, and the internal organization is uniform, and the mechanical properties are stable. Cold-drawn round steel is used in the field of machinery manufacturing to manufacture shaft, gear and other key parts; In the automobile industry, it is the ideal material selection for engine crankshaft, transmission shaft and other components; In the construction industry, it is often used to make strong connectors and support structures, and is widely used in many industries with strict material performance requirements.
1.GX is Factory or Trade enterprise?
GX is an enterprise incorporating Factory and Trade .
2.Where is your factory located? How can I visit there?
Headquarter:Hi-tech development zone,Shijiazhuang,Hebei Province
Factory:Xingtang County,Shijiazhuang,Hebei Province
You can take airplane to Shijiazhuang,then we can pick you up to factory by car about 1 hour.
3.Which Certificate of your product does your company have?
ISO9001 IATF 16949:2016
4.Before order, we need sample for test ,is it ok?
Yes, of course. We provide sample for test before bulk order.
5.How does your company to control your product quality?
Quality is the cornerstone of the survival and development of GX.
We control quality from the beginning to the end all the time.
- Similar Products
$700.00
25 Tons (MOQ)
12.70mm Unbonded Steel Strand for Prestressed Concrete
Tianjin Qiangbang Industrial Co., Ltd.
$128.00
5000 Square Meters (MOQ)
Global Supply of Plastic Greenhouses Produced in China
Shandong Haohang Intelligent Equipment Co., Ltd.
$56.00
1000 Pieces (MOQ)
Ground Helical Screw Pile Anchor for Foundation Systems
Jinan Better Mechanical Equipment Co., Ltd.
$800.00
1 Square Meter (MOQ)
Modular Modern Custom Space Capsule Prefabricated Two-Story Container House
Guangdong Guose Modular Building Co., Ltd.
$15.00
10 Pieces (MOQ)
Type C Steel Material Bar Grating for Stair Tread
Ningbo Zhongzheng Steel Grating Co., Ltd.