Swipe or use the arrows to view product images.
Diameter 25.4mm Long 2.5m Cold Drawing Process Steel Bar for Engine Components
| Price | $970.00 |
|---|---|
| Min Order | 1 Ton |
| Availability | In Stock |
| Shipping From | Hebei, China |
| Popularity | 333 people viewed |
Model NO.:
Diameter 25.4mm Long 2.5m
After-sales Service:
Processing Service
Processing Technology:
Cold Drawing
Tensile Strength:
≥600MPa
Yield Strength:
≥355MPa
Elongation:
≥16%
Percentage of Contraction:
≥40%
Impact Toughness Value:
≥39j/Cm²
Surface Roughness:
Ra0.8μm-Ra3.2μm
Material:
Ck45
Trademark:
GX
Transport Package:
Wooden Box/Hollow Plat
Specification:
Diameter 25.4mm Long 2.5m
Origin:
Shijiazhuang
HS Code:
7214100000
Product Description
| Material | C | Si | Mn | P | S | Cr | Mo | Ni |
| CK45 | 0.42%~0.50% | ≤0.40% | 0.50%~0.80% | ≤0.035% | ≤0.030% | ≤0.40% | ≤0.10% | ≤0.40% |
| 1215 | ≤0.09% | ≤0.10% | 0.75%~1.05% | 0.04%~0.09% | 0.26%~0.35% |
Cold drawn round steel is a high quality metal material made by cold drawing process. It is made of hot-rolled round steel as billet, which is drawn by strong force at room temperature through a specific mold, so that the diameter of the round steel is accurately reduced. This process gives it many advantages: high dimensional accuracy and precise control of diameter deviation to meet the needs of precision manufacturing; The surface is very smooth, low roughness, reduce the subsequent grinding process; Due to the cold hardening effect, the strength and hardness are significantly improved, and the internal organization is uniform, and the mechanical properties are stable. Cold-drawn round steel is used in the field of machinery manufacturing to manufacture shaft, gear and other key parts; In the automobile industry, it is the ideal material selection for engine crankshaft, transmission shaft and other components; In the construction industry, it is often used to make strong connectors and support structures, and is widely used in many industries with strict material performance requirements.
1.GX is Factory or Trade enterprise?
GX is an enterprise incorporating Factory and Trade .
2.Where is your factory located? How can I visit there?
Headquarter:Hi-tech development zone,Shijiazhuang,Hebei Province
Factory:Xingtang County,Shijiazhuang,Hebei Province
You can take airplane to Shijiazhuang,then we can pick you up to factory by car about 1 hour.
3.Which Certificate of your product does your company have?
ISO9001 IATF 16949:2016
4.Before order, we need sample for test ,is it ok?
Yes, of course. We provide sample for test before bulk order.
5.How does your company to control your product quality?
Quality is the cornerstone of the survival and development of GX.
We control quality from the beginning to the end all the time.
- Similar Products
$128.00
5000 Square Meters (MOQ)
Plastic Greenhouse Construction Manufacturers Exporting to Europe
Shandong Haohang Intelligent Equipment Co., Ltd.
$800.00
1 Square Meter (MOQ)
Modular Double Soundproof Bedroom Space Capsule Two-Tier Space Capsule
Guangdong Guose Modular Building Co., Ltd.
$30.00
10 Square Meters (MOQ)
China Factory Wholesale Price Compound Flooring with CE Approval
Ningbo Jiulong Machinery Manufacturing Co., Ltd.
$20.00
10 Pieces (MOQ)
Pick Proof Trench Cover with Ce Approval
Ningbo Jiulong Machinery Manufacturing Co., Ltd.