Swipe or use the arrows to view product images.
Distribution Transformer Corrugated Fin Tank Side Seam Welding Machine
| Price | $100000.00 |
|---|---|
| Min Order | 1 Set |
| Availability | In Stock |
| Shipping From | Shanghai, China |
| Popularity | 272 people viewed |
Model NO.:
customized
After-sales Service:
Onsite Commission and training
Warranty:
2 Years
Raw Material:
St12/SPCC Cold-Rolled Shee
Material Thickness:
1.0-1.5mm
Corrugated Fin Width:
300-1600 mm
Corrugation Pitch Distance:
40-80 mm
Any Ten Corrugation Pitch Distance Accum:
2mm,
The Bottom of Corrugation Fin Diagonal T:
3mm
Corrugation Fin Height:
50-400 mm
Cavity Oil Gap:
6 mm
Reinforcing Bars:
8-10mm
Slider Adjustable Width:
280-1620mm
Main Equipment Work Platform Height:
900mm
Welding Gun Lift Stroke:
430mm
Welding Speed:
0.5-1m/Min
Protective Gas Flow:
15L/Min
Compressed Air System Pressure:
0.7MPa
Trademark:
Senerge
Transport Package:
Standard Packing
Specification:
L9500 W4200 H2250mm
Origin:
Zhejiang
Product Description
Automatic Welding Machine for Transformer Corrugated Fin
Equipment is composed of three parts: feeding roller, main machine, discharge roller.
Main machine include the base, two sets of symmetrical width adjustable slider, transfer device, positioning device, welding device, two sets of MIG welding machine, compressed air system and electric control system.
Machine is easy to be operated, the operator adjust the slider according to corrugated fin width before operated and input the parameters into the touch screen, such as welding corrugated fin (height, Corrugation Pitch distance) and welding speed, welding form, etc. The operator put the corrugated fin into main machine from the feeding roller by manual, the sensor set up at the entrance of main equipment start to operate automatically after receiving the signal.
2.1 Corrugated fin basic parameters
Raw material: ST12/SPCC cold-rolled sheet
Material thickness: 1.0-1.5mm
Corrugated Fin form: front distance or back distance, horizontal or up-curved shape. Reinforced bars position is on the upside of the seam of corrugated fin.
Corrugated fin width: 300-1600(±1)mm
Corrugation Pitch distance:40-80(±0.25)mm
Any ten Corrugation Pitch distance accumulative tolerance ≤±2mm, The bottom of Corrugation fin diagonal tolerance≤3mm
Corrugation Fin height:50-400(±0.20)mm
Cavity oil gap: 6(±0.60)mm
Reinforcing bars: Φ8-Φ10
Others: corrugated fin seam should be straight, tolerance of commissure ≤±0.10mm.Corrugated fin should be natural droop state in the length direction, the two terminal plane tolerance in length direction ≤±3mm.
2.2 Machine basic parameters
Slider adjustable width: 280-1620mm
Main equipment work platform height: 900mm
Welding gun lift stroke: 430mm
Welding speed: 0.5-1m/min
Protective gas type: 85%Ar+15%CO2
Protective gas flow: 15L/min
Compressed air system pressure: 0.7Mpa
Total power: about 30kw
Weight: about5000kg
Overall dimension: about L9500*W4200*H2250mm
1.Summary
BH-2/400/1600 corrugated Fin Auto welding machine is special welding machine for transformer oil tank corrugated fin seam welding and reinforcing bar welding.Equipment is composed of three parts: feeding roller, main machine, discharge roller.
Main machine include the base, two sets of symmetrical width adjustable slider, transfer device, positioning device, welding device, two sets of MIG welding machine, compressed air system and electric control system.
Machine is easy to be operated, the operator adjust the slider according to corrugated fin width before operated and input the parameters into the touch screen, such as welding corrugated fin (height, Corrugation Pitch distance) and welding speed, welding form, etc. The operator put the corrugated fin into main machine from the feeding roller by manual, the sensor set up at the entrance of main equipment start to operate automatically after receiving the signal.
- Main technical performance
2.1 Corrugated fin basic parameters
Raw material: ST12/SPCC cold-rolled sheet
Material thickness: 1.0-1.5mm
Corrugated Fin form: front distance or back distance, horizontal or up-curved shape. Reinforced bars position is on the upside of the seam of corrugated fin.
Corrugated fin width: 300-1600(±1)mm
Corrugation Pitch distance:40-80(±0.25)mm
Any ten Corrugation Pitch distance accumulative tolerance ≤±2mm, The bottom of Corrugation fin diagonal tolerance≤3mm
Corrugation Fin height:50-400(±0.20)mm
Cavity oil gap: 6(±0.60)mm
Reinforcing bars: Φ8-Φ10
Others: corrugated fin seam should be straight, tolerance of commissure ≤±0.10mm.Corrugated fin should be natural droop state in the length direction, the two terminal plane tolerance in length direction ≤±3mm.
2.2 Machine basic parameters
Slider adjustable width: 280-1620mm
Main equipment work platform height: 900mm
Welding gun lift stroke: 430mm
Welding speed: 0.5-1m/min
Protective gas type: 85%Ar+15%CO2
Protective gas flow: 15L/min
Compressed air system pressure: 0.7Mpa
Total power: about 30kw
Weight: about5000kg
Overall dimension: about L9500*W4200*H2250mm
- Similar Products
$0.20
1 Piece (MOQ)
Portable Display Parts Factory Outlet
Dongguan Xinyali Hardware Products Co., Ltd.
$500000.00
1 Set (MOQ)
Complete Calcination Magnesium Project Equipment
Henan Zhengzhou Mining Machinery Co., Ltd.
Negotiable
1 Piece (MOQ)
Automatic Intelligent Curing Cabinet Controller
Zhejiang Tugong Instrument Co., Ltd.