Swipe or use the arrows to view product images.
Eccentric Overburden Drilling Equipment Systems 165mm for Chile Water Well Drilling
| Price | Negotiable |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Anhui, China |
| Popularity | 271 people viewed |
Model NO.:
ODEX
Certification:
CE, RoHS, ISO 9001:2000, ISO 9001:2008
Standard:
AISI, ASME, BS, ANSI, JIS, GB, GOST, ASTM, DIN
Surface Treatment:
Polishing
Manufacturing Process:
Forging
Material:
Alloy Steel
Trademark:
ROSCHEN
Transport Package:
Steel Bundle
Specification:
90 ~ 280
Origin:
China
HS Code:
8431431000
Product Description
Eccentric Overburden Drilling Equipment
Product Description
Product Description
Eccentric Overburden Drilling Equipment features Step-by-step
1. When drilling starts, the reamer swings out and reams the pilot-hole wide enough for the casing tube to slide down behind the drill the drill bit assembly.
2. When the required depth is reached, rotation is reversed carefully, where upon the reamer swings in, allowing the drill bit assembly to be pulled up through the casing.
3. Casing tubes that are to be left in the drilling hole should be sealed at the bottom of the hole by means of cement grout or some other sealing agent.
4. Drilling continues to the desired depth in the bedrock using a conventional drilling.
ODEX
ROSCHEN produces ODEX Eccentric Overburden Drilling System, starting with the ODEX90 to ODEX445. This three -piece system comprises of pilot bit, reamer,guide device. ROSCHEN ODEX overburden drilling systems are widely used in a variety of applications from well drilling and mining to rock anchoring and site investigation.
Advantages:
- Rapid removal of cuttings; High penetration rate, especially in resistant rock formation;
- Easy soil and groundwater sampling during drilling;
- Possible to measure yield estimate at selected depth in the formation;
- Advantageous in unconsolidated formations with a high risk of caving
Application Range:
It is suitable for drilling water wells, geothermal wells, short mirco piles, medium mini-type grouting hole of building, dam and harbour project.
1. When drilling starts, the reamer swings out and reams the pilot-hole wide enough for the casing tube to slide down behind the drill bit assembly.
2. When the required depth is reached, rotation is reversed carefully, whereupon the reamer swings in, allowing the drill bit assembly to be pulled up through the casing.
3. Casing tubes that are to be left in the drill hole should be sealed at the bottom of the hole by means of cement grout or some other sealing agent.
4. Drilling continues to the desired depth in the bedrock using a conventional drilling.
ROSCHEN INC.
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED
http://roschen.en.made-in-china.com
| TUBEX XL PRODUCT RANGE | ||||||||||
| TUBEX TYPE | APPLICABLE CASING PIPE | MIN. WALL THK. | MAX. DRILL BIT DIAMETER (A) | REAMING DIAMETER | ||||||
| MAX. O.D | MIN. I.D. | |||||||||
| IN | MM | IN | MM | IN | MM | IN | MM | IN | MM | |
| 90 | 4.5" | 115 | 4.0" | 102 | .197" | 5 | 3.5" | 90 | 4.8" | 123 |
| 115 | 5.6" | 142 | 5.0" | 128 | .197" | 5 | 4.5" | 115 | 6.0" | 152 |
| 140 | 6.7" | 171 | 6.2" | 157 | .197" | 5 | 5.5" | 140 | 7.4" | 187 |
| 165 | 7.7" | 196 | 7.2" | 183 | .197" | 5 | 6.5" | 165 | 8.3" | 212 |
| 180 | 8.6" | 219 | 7.6" | 194 | .217" | 5.5 | 7.1" | 180 | 9.1" | 232 |
| 190 | 8.7" | 222 | 8.1" | 205 | .248" | 6.3 | 7.5" | 190 | 9.3" | 237 |
| 215 | 10.1" | 257 | 9.5" | 241 | .248" | 6.3 | 8.5" | 215 | 10.9" | 278 |
| 230 | 10.6" | 270 | 9.8" | 250 | .248" | 6.3 | 9.1" | 230 | 11.3" | 286 |
| 240 | 10.7" | 273 | 10.2" | 260 | .248" | 6.3 | 9.5" | 240 | 12.0" | 306 |
| 280 | 12.9" | 327 | 12.0" | 305 | .280" | 7.1 | 11.0" | 280 | 14.6" | 370 |
ODEX
ROSCHEN produces ODEX Eccentric Overburden Drilling System, starting with the ODEX90 to ODEX445. This three -piece system comprises of pilot bit, reamer,guide device. ROSCHEN ODEX overburden drilling systems are widely used in a variety of applications from well drilling and mining to rock anchoring and site investigation.
Advantages:
- Rapid removal of cuttings; High penetration rate, especially in resistant rock formation;
- Easy soil and groundwater sampling during drilling;
- Possible to measure yield estimate at selected depth in the formation;
- Advantageous in unconsolidated formations with a high risk of caving
Application Range:
It is suitable for drilling water wells, geothermal wells, short mirco piles, medium mini-type grouting hole of building, dam and harbour project.
1. When drilling starts, the reamer swings out and reams the pilot-hole wide enough for the casing tube to slide down behind the drill bit assembly.
2. When the required depth is reached, rotation is reversed carefully, whereupon the reamer swings in, allowing the drill bit assembly to be pulled up through the casing.
3. Casing tubes that are to be left in the drill hole should be sealed at the bottom of the hole by means of cement grout or some other sealing agent.
4. Drilling continues to the desired depth in the bedrock using a conventional drilling.
For more information, please contact:
ROSCHEN INC.
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED
http://roschen.en.made-in-china.com
- Similar Products
$2.09
500 Pieces (MOQ)
High Strength and Hight Quality Rock Anchor Bolt Plate
Hebei Langben Building Materials Co., Ltd
Negotiable
1 Piece (MOQ)
Bronze Mining Machinery Parts for Cone Crusher
Zhejiang Yongcheng Machinery Co., Ltd.