Swipe or use the arrows to view product images.
Electronic Power and Aluminum, Alloy Steel Material Load Cell
| Price | $230.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Zhejiang, China |
| Popularity | 344 people viewed |
Model NO.:
HMD2003
Type:
Resistance Strain Gauge Pressure Sensors
Component:
Mechanical Structure Type
For:
Strain Gauge Pressure Transmitter
Output Signal Type:
Analog Type
Production Process:
Integration
Material:
Stainless Steel
Thread Type:
G
Wiring Type:
Four-Wire
Measuring Medium:
Alloy Steel
IP Rating:
IP66
Certification:
ISO
Customized:
Customized
Trademark:
HMD
Transport Package:
Carton Box
Specification:
different size
Origin:
China
Product Description
Description:
Wire rope load cell HMD2003 is designed to clamp onto a static cable / wire rope allowing for a simple way of detecting overload conditions on a crane, hoist, or winch. Using one of our digital indicators or load cell amplifiers, the system can provide relay ouptuts to activate a light. shut down the lifting operation, activate an audible alarm, or any combination of these.
Advantage:
Using a four wire strain bridge configuration, the cells put out 2mV/V and offer good linearity, repeatability and temperature stability. The design is simple, two roller bearing sheaves are mounted in a rigid frame. The rope is clamped in the middle of the load cell between the two sheaves. As tension increases the force against the two sheaves is transmitted as an electrical signal to the display as a direct reading of the line tension. Various Models are available.
Drawing:
Wire rope load cell HMD2003 is designed to clamp onto a static cable / wire rope allowing for a simple way of detecting overload conditions on a crane, hoist, or winch. Using one of our digital indicators or load cell amplifiers, the system can provide relay ouptuts to activate a light. shut down the lifting operation, activate an audible alarm, or any combination of these.
Advantage:
Using a four wire strain bridge configuration, the cells put out 2mV/V and offer good linearity, repeatability and temperature stability. The design is simple, two roller bearing sheaves are mounted in a rigid frame. The rope is clamped in the middle of the load cell between the two sheaves. As tension increases the force against the two sheaves is transmitted as an electrical signal to the display as a direct reading of the line tension. Various Models are available.
Drawing:
| Capacity(t) | A | B | C | D | Diameter of rope |
| 1t~2 | 200 | 44 | 30 | 35 | ≤∅15 |
| 3t~8 | 200 | 56 | 35 | 40 | ≤∅20 |
| 10t~20 | 280 | 70 | 40 | 50 | ≤∅25 |
| MODEL | HMD2003 | |||||||
| COMPREHENSIVE ERROR | C3 0.02 0.03 | |||||||
| OUTPUT SENSITIVITY mV/V | 2.0±0.25% | |||||||
| NONLINEARITY %F.S | ± 0.02 ± 0.03 | |||||||
| REPEATABILITY %F.S | 0.02 0.02 | |||||||
| HYSTERESIS %F.S | ± 0.02 ± 0.03 | |||||||
| CREEP (30min)%F.S | ± 0.02 ± 0.03 | |||||||
| TEMP.EFFECT ON ZERO %F.S/10ºC | ≤0.002 ≤0.003 | |||||||
| TEMP.EFFECT ON OUTPUT %F.S/10ºC | ≤0.002 ≤0.003 | |||||||
| ZERO OUTPUT %F.S. | ±1 | |||||||
| INPUT RESISTANCE Ω | 400±30 | |||||||
| OUTPUT RESISTANCE Ω | 350±3 | |||||||
| INSULATION RESISTANCE MΩ | ≥5000 | |||||||
| EXCITATION VOLTAGE V(DC/AC) | 5~12V | |||||||
| OPERATION TEMP.RANGE ºC | -30~+80 | |||||||
| OVERLOAD CAPACITY %F.S. | 150 | |||||||
| CAPACITY | 1~20t | |||||||
| DEGREE OF PROTECTION | IP66 | |||||||
- Similar Products