Swipe or use the arrows to view product images.
Elevator Equipments Conveyor No Contact Belt Deviation Sway Sensor Switch
| Price | $50.59 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Jiangsu, China |
| Popularity | 437 people viewed |
Model NO.:
JPNS-II-G
Type:
Belt Sway Switch
Principle:
Pyroelectric
Wires:
3 Wires
Standard:
Standard
Application:
Industrial Automation
IP Grade:
IP66
Output Signal:
Switch Signal
Resetting Mode:
Automatic Resetting
Transport Package:
Carton Cushioning Packing
Specification:
Standard
Origin:
China
Product Description
Technique Parameters:
| Working Voltages:220VAC±15% | Load Current:≤5A |
| Insulation rResistance:>500MΩ | Output Singal:Switch Singal |
| Environment temperature:-20ºC~+60ºC | Environment Humidity:<90% |
| Weight :2Kg | IP Grade:IP66 |
| Resetting Mode: Automatic Resetting | Responsive Time:<2mS |
| Control Contact Capacity:250V/5A | Force :50±10N |
Installation Diagram
Installation Size Diagram
Introduction
No contact belt sway switch is mainly used in the instant data monitoring of the long distance working condition of the long distance belt transportation machine. It adopts the on sight(RS845bus) to realize the long distance alarming function. It is highly time effectiveness.It can effectively protect the equipment and people's safety and avoid the extension of the accident to ensure the production, and protect the equipment. Also the signal can reach the controlling system to realize the factory automatic control. So to reach the purpose of reduce the employee and increase the efficiency. Concentrating the controlling and make benefit to the production and arranging.
Application
The machine can be widely used in belt transportation used industries like Steel, Power Station, Chemicals, Cement, Coal, Metallurgy, Mining, Port, Grain Warehouse, etc.
Working principle
This no contact sway belt switch is installed on the both sides of the walls of the elevators.when we installit, we should pay attention that the distance between damper and belt should be set over the safety distance(the distance can be adjusted,it is determined by the user and it is based on the rational sway scope of the carft documents agreement).
when the belt goes outward, it will fricted on the damper and the damper will be sent to the adjustment bar, the bar will take action on the senor and the sensor will give out the alamring signals.
Product Display
- Similar Products