F21-6s Radio Remote Control on Electric Hoists

F21-6s radio remote control on electric hoists


Products Application:
Single hook electric cable hoist, monorails, single speed electric hoist or electric single speed hoist crane,
and used for the industrial remote control which are under 6 connection.




Brief Introduction:
Transmitter:               size:164*75*46mm                 weight: 350g
Receiver:                   size:185*85*85mm                 weight: 550g
 
Specifications: 
Control distance:                                 up to 100m
Unique code:                                     over 4.3billon unique ID codes .
Temperature:                                     -35°C___+80°C
Enclosure protection class:                 IP65
Transmitter power:                             DC3v
Receiver power:                                 AC 380v/ 36v/220V or DC12V/24V
Output capacity:                                 Full sealed relay output with 5 amperes 


 
Standard configuration:               
                          One transmitter;
                          One receiver;
                          One 1m cable connect with receiver;
                          One operation and maintain manual.
 

 
Products Features:
* 8 push buttons with 7 single-speed buttons and 1 stop buttons. 
* Control points up to 6. 
* With the battery voltage alarm device to cut off the circuit when voltage is insufficient.
* With the Rotate key switch to guarantee the safety.
* Set the internal functions by computer interface.
* Up/down, east/west, south/ north push button can be set mutual inhibition or not.
* Spare 1 key can be set start, speed up, jump strokes, ordinary etc.


 
SPECIFICATION: