Swipe or use the arrows to view product images.
FRP Epoxy Resin Profiles for Anti-Corrosion Extrusion Profiles
| Price | $12.90 |
|---|---|
| Min Order | 100 Pieces |
| Availability | In Stock |
| Shipping From | Hebei, China |
| Popularity | 486 people viewed |
Model NO.:
16mm
Surface Treatment:
Smooth
Color:
Yellow
Thickness:
4.6mm-28.8mm
Usage:
Environmental Protection, Industral, Household
Product Categories:
Fiberglass Profile
Molding Method:
Resin Transfer Molding
Material:
FRP
Fiber Type:
BFRP
Type:
Epoxy FRP
Application Areas:
Construction, Chemical
Molding Process:
Pultrusion
Designability:
Powerful
Thermal Conductivity:
Low
Corrosion Resistance:
Excellent
Tensile Strength:
Strength Can Reach Over 400MPa
Density:
The Relative Density Is About 1.5 to 2.0
Material Type:
Glass Fiber Reinforced Plastic (Gfrp), a Composite
Wear Resistance:
High Surface Hardness, Resistant to Wear
Anti-Aging Performance:
Anti-Aging Agents Added to Extend Service Life
Sound Insulation:
Possesses Certain Sound Insulation Properties
Light Transmission:
Transparent or Translucent
Maintenance Cost:
Low Maintenance Cost
Shear Strength:
High
Compressive Strength:
High Compressive Load-Bearing Capacity
Trademark:
Hirain
Transport Package:
Wooden Pallets, Wooden Boxes, Containers
Specification:
6 m, 12 m
Origin:
China, Hebei
Product Description
FRP Extruded Profiles C Channel Pultruded Profiles Fiberglass C Channel Beams
FRP pultruded profiles are a composite material that has unique properties that can be used in a variety of applications. Most bars consist of polyester resin and glass fibers. These composites can be made into nearly any shape through the pultrusion process. They are strong, lightweight, corrosion resistant, and reliable.Available in a variety of sizes. Weight depends on diameter.
We can customize if you need!| Width(mm) | Height(mm) | Thickness(mm) | Weight(kg/m) |
| 32 | 32 | 3 | 0.516 |
| 48 | 31 | 3 | 0.596 |
| 50 | 50 | 8 | 2.047 |
| 80 | 30 | 3 | 0.768 |
| 100 | 50 | 3 | 1.25 |
| 150 | 50 | 3 | 1.4 |
1. The relative density is between 1.5 and 2.0, only 1/4~1/5 of carbon steel, but the tensile strength is close to or even higher than that of carbon steel, and the specific strength can be compared with high-grade alloy steel.
2. FRP is a good anti-corrosive material with good resistance to atmospheric, water and general concentrations of acid, bases, salts and a variety of oils and solvents. It has been applied to all aspects of chemical corrosion protection and is replacing carbon steel, stainless steel, wood, non-ferrous metals and so on.
3.It is an excellent insulating material used to make insulators. Good dielectric properties at high frequencies. FRP has a low thermal conductivity, which is 1.25~1.67kJ(m.h.K) at room temperature, and only 1/100~1/1000 of metal. It is an excellent thermal insulation material.
4. According to the needs, we can flexibly design various structural products to meet the requirements of use, which can make the products have good integrity. The molding process can be flexibly selected according to the shape, technical requirements, use and quantity of the product.
1. Electrical electronics markets: cable tray, random, insulation ladder;
2. Chemical anti-corrosion markets: grating floor, handrail, working platform, under grand pressure pipe, stairs, etc;
3. Building construction markets: oversize bridge protection closed system, movable house structure, working platform etc;
4. Foundation engineering markets: freeway anti-glare shield and its handrail, lamp post, water treatment, bracket for huge industry cooling tower.
During the pultrusion process,the raw material are pulled through a heated steel forming die using a continuous pulling device. when the reinforcements are saturated with the resin mixture in the resin bath and the wetted reinforcement package is wrapped in a surfacing veil. the completed package then goes into a performer that roughly forms the package into the appropriate shape to enter the heated die for curing. the die is the exact shape of the final part desired. upon exiting the die, the part is over 90% cured and solid. the length of the part required is pulled through the cutoff saw and the process is complete.
| Packing | By woven bags and pallet or cartons. |
| Shipment | By sea, land, air and express. |
| Loading port | Tianjin port, Qingdao port, any port of China. |
| All the above can be customized as per customer's requirement. | |
Nuokon guarantees the principle of Quality is the first, and customers are supreme ,its product quickly opened up the market in a short time,not only covered the domestic large and medium-sized cities, but also sold to many countries with good reputation. we have large production capacity, to provide comprehensive technical support services and personalized customized services to ensure that customers get customized solutions that meet their unique needs. We sincerely hope to achieve win-win cooperation with everyone, use our solutions to help you solve various problems, and become your trusted gold medal supplier!
- Similar Products
$18.00
20 Square Meters (MOQ)
Fiberglass Reinforced Plastic Grate FRP Grating GRP Gratings Walkway Flooring
ZDProTech Technology Co., Ltd.
$300.00
10 Pieces (MOQ)
China Factory High Strength Customized Waterproof GRP Radome FRP Radome
LANDYOUNG GROUP CO., LTD.
$30.00
10 Meters (MOQ)
Fiberglass Composite FRP GRP Grv Pipe
Hebei Derunze Chemical Equipment Co., Ltd
$37.85
10 Square Meters (MOQ)
High Quality Wholesale FRP Micro Mesh Grating with Bare-Foot Friendly Grit Surface for Walkway
Nanjing Greentech Co., Ltd.