Swipe or use the arrows to view product images.
Factory Customize Sht3X I2c Temperature Humidity Sensor Probe for Laboratory
| Price | $13.00 |
|---|---|
| Min Order | 2 Pieces |
| Availability | In Stock |
| Shipping From | Guangdong, China |
| Popularity | 448 people viewed |
Model NO.:
SHT30
Installation Type:
Surface Mounting
Sensing Type:
Resistive
Contact:
Contact
Output Signal Type:
Analog Type
Production Process:
Waterproof
Material:
Ceramics
Measuring Medium:
Humidity
IP Rating:
IP56
Certification:
ISO
Customized:
Customized
Temperature Range:
-40deg~+125deg
Humidity Range:
0 - 100% Rh
Length:
85cm, 1m, 1.5m, 2m, etc
Probe:
Ceramic Case, Stainless Steel Probe, ABS Probe
Cable:
PVC Cable
Humidity Accuracy:
±2 @2-100% Rh
Temperature Accuracy:
±0.2 @0-90ºC
Power Range:
3V to 5.5V
Cable Color:
Black, White
Output:
One Wire
Pin:
Vcc, Gnd, Scl, Sda
Connector:
Stripped Tinned
Communication Interface:
I2c
Type:
Waterproof
Customiz:
Accept
Trademark:
Senstech
Transport Package:
PE Bag, Paper Carton
Specification:
SHT3X
Origin:
Guangdong, China
HS Code:
9025191010
Product Description
SHT35 Temperature Humidity Sensor Probe
| Sensor | SHT3X 0X44/0X45 i2C |
| Cable | PVC cable*4C |
| Cable length | L |
| Wire ending | Stripped tinned or Connector |
More Specifications
| Sensor | SHT40, SHT45, SHT31, SHT30, SHT35, SHT20, SHT21, DHT20, DHT11, DHT22 etc |
| Cable | PVC cable, Silicone cable, TPE Flat Jacket cable, PVC Cold-resistant Jacket cable, or another |
| Probe | Stainless steel probe, Ceramic Case, Brass probe, PE, or customized |
| Connector | Aviation plug, PH, XH, SM, EL, Pin terminal, TE, Molex, Terminal blocks, OD2.5mm stereo plug, OD3.5mm stereo plug, 0508 terminal, fork terminal, stereo plug, RJ11/12/45 connector, or another |
| Length | 1m, 1.5m, 2m, 5m, 10m, 20m, 100m or customized |
Click here to get a datasheet........
This SHT20 I2C temperature & humidity sensor is equipped with waterproof probe. It comes with the 4C CMOSens® SHT20 temperature & humidity sensor chip and the probe has gone through dual waterproof protection test.
The SHT20 I2C temperature & humidity sensor adopt Sensirion techniques. Except the humidity sensor of capacitive type and the temperature sensor of band gap , SHT20 contains an amplifier, A/D converter, OTP memory and a digital processing unit. Compared with early SHT1x series and SHT7x series, SHT20 shows a strong reliability and long-term stability. It can measure surrounding environment temperature and relative air humidity precisely.
The Arduino SHT20 waterproof temperature & humidity sensor adopts dual waterproof protection techniques. The inner PCB has perfusion and encapsulation protection, and the probe enclosure is made of PE waterproof materials. This is a special waterproof breathable material that allows water molecules to seep in while blocking water droplets from seeping in at the meantime. The sensor won't be damaged even after a long time submerge in the water. There is also a built-in 10k Pull-up resistor and 0.1uf filter capacitor. It enables the sensor to be directly used with the microcontroller such as Arduino. We recommend DFRobot Gravity 4Pin Sensor Adapter convenient.
The SHT20 I2C temperature & humidity sensor adopt Sensirion techniques. Except the humidity sensor of capacitive type and the temperature sensor of band gap , SHT20 contains an amplifier, A/D converter, OTP memory and a digital processing unit. Compared with early SHT1x series and SHT7x series, SHT20 shows a strong reliability and long-term stability. It can measure surrounding environment temperature and relative air humidity precisely.
The Arduino SHT20 waterproof temperature & humidity sensor adopts dual waterproof protection techniques. The inner PCB has perfusion and encapsulation protection, and the probe enclosure is made of PE waterproof materials. This is a special waterproof breathable material that allows water molecules to seep in while blocking water droplets from seeping in at the meantime. The sensor won't be damaged even after a long time submerge in the water. There is also a built-in 10k Pull-up resistor and 0.1uf filter capacitor. It enables the sensor to be directly used with the microcontroller such as Arduino. We recommend DFRobot Gravity 4Pin Sensor Adapter convenient.
Application:
1. HVAC
2.Consumer goods
3.Weather stations,
4.Test & measurement
1. HVAC
2.Consumer goods
3.Weather stations,
4.Test & measurement
5.Automation Medical
6.Humidifiers
6.Humidifiers
7. Greenhouse
8. Cold-chain transportation
and so on.....
and so on.....
- Similar Products
$0.60
1000 Pieces (MOQ)
S Type Expendable Consumable Thermocouple
Xinji Kexin Metallurgical Equipment Co., Ltd.
$9.99
100 Pieces (MOQ)
High Temperature Stainless Steel Rtd PT1000 Temperature Sensor Probe
SENSTECH LTD.