Factory Outlet Low Price Multi-Surface Repair Fiberglass Metal Patch Mesh

Product Description:
A square of drywall mesh tape with high tack rubber-based adhesive is laminated to a square of adhesive coated,
perforated metal plate that is situated such that the adhesive coating on the metal plate is facing away from the
drywall tape and is centered. This patch has a liner on each side of the piece.

Specification:
4"x4" Metal Patch 6"x6" Metal Patch
100mmx100mm 152mmx152mm

Materials of product:
* Drywall tape
* Metal plate part - galvanized steel or Aluminum for optional
Adhesive coated, hole diamond pattern, perforated, non-corrosive metal plate
* White opaque line
* Clear liner

Advantages and Benefits:
*Permanent repair on walls & ceilings
*Easy to use
*Self adhesive

Package: :
Each patch in a carton bag or on customer's request

Materials Needed for use:
* Spackling
* Flexible putty knife
* Sand Paper
* Texture (Optional)

Instructions of use:

Step 1: Clean area to be patched. Remove any loose pieces and smooth any rough edges.
Step2: Remove liner from self-adhesive patch. Apply patch over center of hole and press firmly around the outer
edges to ensure adhesion.
Step3: Using a flexible putty knife, apply a generous coat of lightweight spacking to the patched area. Refer to
lightweight spackling container for proper application and clean up.
Step4: Once dry, sand area smooth using sandpaper. The patched area can now be painted, textured or
wallpapered.