Factory Price of The Hand Tool Airless Sprayer Paint

 

 

 

 

1. After the spraying operation, loosen the handle of the backflow valve counterclockwise, release the pressure to zero and then turn off the motor, otherwise the motor will be burnt out or the internal accessories of the machine will be damaged.
2. Clean the machine immediately after spraying.
When cleaning, it is only necessary to change the paint into the corresponding solvent according to the same procedure as when working, until all the paint in the high-pressure pipe and spray gun is sprayed out in the machine.
3. After the spray coating machine is used for a period of time, it is necessary to clean the screen of the spray gun. The method is as follows:
Remove the movable joint and pinch plate, unscrew the handle of the spray gun, remove the filter element in the handle and clean it, then put it back and tighten it in turn. If the filter element is found damaged during cleaning, it should be replaced in time.
4, regularly check whether the bolt is loose, whether the seals are damaged.
5. After the machine is used for 3 months, it is necessary to open the pump cover to check whether the hydraulic oil is clean and sufficient. If replacement is needed, clean the pump body with kerosene before replacement, and then add 85% hydraulic oil.