Menu
Suppliers Products
Global B2B sourcing platform
Verified suppliers and manufacturers
MadeInChina.com > Products > Construction & Decoration > Wire Mesh > Welded Wire Mesh
Swipe or use the arrows to view product images.

Factory Supply Australia Standard 6m X2.4m Steel Reinforcing Concrete Welded Wire Mesh Construction Rebar Mesh Panel

Price $569.00
Min Order 50 Tons
Availability In Stock
Shipping From Hebei, China
Popularity 277 people viewed
Send Inquiry View Full Page
Model NO.:
SL62, SL72, SL82, SL92, F62, F72, F82, F92, F1018
After-sales Service:
24hours Online
Warranty:
5 Years
Material:
Low-Carbon Iron Wire
Hole Shape:
Square
Mesh Size:
200mm X 200mm
Surface Treatment:
Cold Drawing
Weave Technique:
Welded
Application:
Construction Wire Mesh, Protecting Mesh
Color:
Steel Color
Type:
Welded Mesh
Certification:
ISO9001, CE, SGS, BV
Condition:
New
Tensil Strength:
>515MPa
Yeild Strength:
>500MPa
Agt:
1.03
Standard:
AS/NZS 4671
Trademark:
Rocicmhy
Transport Package:
Bundle &Pallet
Specification:
2.4m x6m, 2.2m x 5.6, 2.2 X 5.8m
Origin:
China
HS Code:
73142000
Product Description



SL52/SL62/SL72/SL82/SL92/SL102/SL81 Square reinforcing mesh

Reinforcing mesh was made by deformed bar after drawn,which is accorded to Australian/New Zealand Standard AS-NZS 4671-2001. The material is 250N,300E,500L,500N and 500E,the mesh spaces is 200mm,there is two sides overhang which is 100mm.
 
Clearly ribbed on the surfaceFirmly weld spot
Accurately wire diameterMesh space messured
Uniform mesh spacesFlat and smooth mesh surface

the steel bar after drawing shape as below figure:
1.The angle of the rib or inclined indentation of the reinforcing mesh panels' bar isn't less than 45°. The angle scope is greater than 45°and is less than 70°,the rib height is from 0.025d to 0.10d.

2. The reinforcing mesh panel includes transverse and longitudinal bar,pitch and overhang.The Australian and new zealand's market,the normal panel size is 2.4m*6m.Because of containers size,we always advise our cutomer to make the panel size to be 2.2m*5.8m.It can be easy to be load and save more USD1000 per container for packing and loading cost.
The skatch of reinforcing mesh as below:
 
NL= Number of longitudinal bars
PL= pitch of longitudinal bars
dL= diameter of longitudinal bars
NC=Number of transverse bars		L= length of longitudinal bar
B=Length of transverse bar
u1=Overhang of longitudinal bars                                     
u2=Overhang of longitudinal bars
Common size of Squre reinforcing mesh panel for Austialian Market
Mesh Type and reference numberLongitudinal barsCross-barsMass for 6 x2.4 m sheetsCross-sectional area/m width
No.x dia., mmPitch@mmNo.x dia., mmPitch@mmUnit area kg/sqmSheet, kgLong'l bars sqmm/mCross bars sqmm/m
Squre,with edge side-lapping bars
SL10210x9.5+
4x6.75		200
100		30x9.52005.680354354
SL9210X8.6+
4X6.0		200
100		30x8.62004.666290290
SL8210x7.6+
4x6.0		200
100		30x7.62003.652227227
SL7210x6.75+
4x5.0		200
100		30x6.752002.841179179
SL6210x6.0+
4x5.0		200
100		30x6.02002.233141141
Squre,without edge side-lapping bars
SL8125X7.610060x7.61007.1105454454
UTE Mesh Size 
Product CodeStd UnitLongitudinal WiresCross WiresMass(kg)Dimensions(m)
SL62UTESheet8×6@20020×6@200184×2
SL72UTESheet8×6.75@20020×6.75@200234×2
SL82UTESheet8×7.6@20020×7.6@200304×2



Our products packing and shipment:
 
Steel pallet for reinforcing mesh size 2.4m *6mLoading container for reinforcing mesh sheet:2.4m *6m


3.Each sheet of reinforcing mesh panel shall include number of bars,pitch,length,width, and overhang dimensions. And the bar arrangement of reinforcing mesh panel has single bars,twin bars or combination of single bars and twin bars.
 
Single bars
Twin bars
Combination of single bars and twin bars
4.The technical data of reinforcing mesh panle is contained composition and characteristic mechanical porperties of reinforcing steels.
4.1.1
Table1
Composition of reinforcing steels
Type of analysisChemical composition,% max
All gradesCarbon equivalent value(Ceq)for standard grades
CPS250N500L500N300E500E
Cast analysis0.220.0500.0500.430.390.440.430.49
Products analysis0.240.0550.0550.450.410.460.450.51
4.1.2
Table 2
Characteristic mechanical properties of reinforcing steels 
Property250N
(Note1)		500L
(Note1)		500N300E
(Seismic)		500E
(Seismic)		Type of specified value
Yield Stress(Mpa) RekL
                    RekU 		≥250
---------		≥500
≤750		≥500
≤650		≥300
≤380		≥500
≤600		CvL:p=0.95
CvU:p=0.05
Ratio        Rm/Re≥1.08
---------		≥1.03
-----------		≥1.08
--------		≥1.15
≤1.50		≥1.15
≤1.40		CvL:p=0.90
CvU:p=0.10
Unitform Elogation Agt(%)≥5.0≥1.5≥5.0≥15.0≥10.0CvL:p=0.90
Notes:
  1. Grade 250N is supplied as plain round reinforcing steel complying with AS 3679.1,exceptthe tolerance of the diameter and roundness dosen't apply it.
  2. For 500L steel bars,only requriement for wire diameter is less than 5.0mm is RekL≥500

Material certificate of reinforcing mesh as below:
 
How can we conctrol our products quality for exporting Autralia?
Firstly,we purchase the material from Steel Factory and inspect chemical composition and mechnical property of reinforcing mesh panel in our in-house laboratary according to AS 1554.3.

Secondly,the panel size tolerances meassure way as:
  1. Panel Size dimensions≤6m in length,there is 40mm tolerances.
  2. Panel size dimensions>6m in length,the tolerance is ±0.7%
  3. Wire diameter and mesh size measure and weld shear resistance test conformance to AS NZS 4761-2001 and as per contract.
  4. Weigh the each bundle weight to calculate each panel weight.


  • Similar Products
Full Page Contact Supplier
↑