Swipe or use the arrows to view product images.
Factory Supply Screen Printing Photo Emulsion for Screen Printing
| Price | Negotiable |
|---|---|
| Min Order | 300 kg |
| Availability | In Stock |
| Shipping From | Guangdong, China |
| Popularity | 348 people viewed |
Type:
Solvent Resistance and Water Based
Printing Type:
Digital Printing
Ink Drying:
Penetration Drying
Performance:
Thixotropy
Component:
Pigment
Brand Name:
Autotype
Product Name:
Photo Emulsion
Application:
Screen Printing Industry
Color:
Blue Base
Usage:
Screen Frame Exposure
Name:
Plus 8000 Photo Emulsion
Characteristic:
Stable Performance
Pack:
1kg/Set,6sets/Carton
Specification:
1 KG per can
Origin:
Guandong, China
Product Description
plus 8000 photo emulsion
Product features:
1. Easy to develop, strong printing resistance, easy to peel off and regenerate
2. Autotype Kototai photosensitive adhesive is a high resolution and pollution-free diazonium salt photosensitive adhesive.
3. Has excellent plate making performance, and various types of photosensitive adhesives have their own good characteristics and properties.
1.Prepare photosensitive adhesive
A. Add the photosensitive powder directly into the latex slurry and stir slowly until evenly mixed.B. Leave it for 4-6 hours until the bubbles generated during stirring escape before use.
2.Pre treatment of wire mesh
A. Coarse new polyester
Use a brush dipped in Autoprep to perform circular motion on the wire mesh to achieve uniform roughening.
B.Degreasing treatment
New or used polyester, nylon, and stainless steel mesh need to be thoroughly degreased with Universal Meshprer before use
The law is coarsening.
3.Apply photosensitive oil
Coating, tilt the screen at an angle of 80-85 degrees. Apply using a high-quality sizing agent according to the following method:
A.First, apply two coats on the printing surface and then on the ink surface. After drying at 40 ºC, apply another coat on each side. After drying at 40 ºC, these coatings have been applied
Can meet the requirements of medium mesh size.
B.For thicker silk or thick film screen printing, the number of scraping coatings can be increased on the printing surface after drying.
C.When drying the screen, the ink surface should be placed facing up, and the drying temperature should be 40 ºC.
D.When using water-resistant photosensitive adhesive to make silk screen printing, after exposure and development, drying, and inspection of the screen, it is necessary to evenly apply WF Hardener (WR hardener) on both sides of the screen. After 10-15 minutes, rinse with water and dry before putting it into use. The screen after using hardener (hardener) cannot peel off, and the screen cannot be reused.
Our company sells photo emulsion with specifications of 1kg/can, 5kg/can, and can also customize specifications. Our company also produces and sells printing mesh, frame, scraper, ghosting paste, photosensitive adhesive, release powder and other printing industry products. If you have any needs, please contact us!
Anhui Qianghua Screen Mesh Co., Ltd (Shenzhen Field Import&Export Co.,Ltd) is one of the manufacturer specialized in screen mesh, we have rich production experience, our company specializing in the production of various kinds of printing and dyeing,slik screen printing mesh,mesh adhesive,ghost remover,frames,Squeegee and so on.
- Similar Products
Negotiable
10 kg (MOQ)
Screen Printing Waterproof Clear Inkjet Film Ink
Jiaxing Baichuan Printer Technology Co., Ltd.