Fastener Factory Hex Flange Bolt and Nut, Carbon Steel Galvanized Mechanical Sleeve Expansion Wedge Anchor Bolt with Chemical for Concrete

Product Name: Undercut Mechanical Anchor Bolt

Material
Grade 5.8/8.8/10.9/12.9
Stainless Steel 50, 70, 80

Application
Steel bracket of curtain wall
Caulking cover plate and stair anchorage
Crash barrier sound insulation wall
Steel reinforcement fixed plate
Steel structure fixture
Machinery, conveyor systems and warehousing systemsRail transit, road and bridge, concrete tension
Concrete overlay and structural joint reinforcement

Characteristics
There is no expansion stress, and it is suitable for all kinds of concrete base materials.
There is installation of small edging and small spacing.
There is high bearing capacity, earthquake resistance and fatigue resistance. lt is safe and reliable.
lt is suitable for the environment in which other anchorage can not satisfy.
It has special reaming drill and fast reaming. And it is convenient to install.
There is built-in lock key expansion. And it can be embedded in the pre-reaming cavity.
t can show the perfect lock key effect.
When the buried depth is insufficient, the force can be checked according to the specification.
It performs well under long-term load, cyclic load and seismic load.

How to install undercut mechanical anchor?
1.Use ordinary impact drll mounted on the corresponding ciameter of the drll,according to the anchor size. When drling, the depth should be based onthe specific type and specification of the anchor bolt, the vertcality buried plate aperture and the maximum clearance are refered to the specification JGJ145-2013;

3. Use special drill for reaming;

4. Clean the hole again with a brush and a air pump;

5.a Preset td pe: before installationed tighten each part of the anchor bolt and ensure that each part of the anchor bolt is not loosed and the lock ked is not open.Then use a hammer to hit the speciel tool (installation tool)d and push the anchor bolt into the hole until the end surface of the casing is fush with the plane of the concrete base material.
b Penetration tdpe: before installationed tighten each part of the anchor bolt and ensure that each part of the anchor bolt is not loosed and the lock ked is open. Then use a hammer to hit the special tool (intllation tool)d and push the anchor bot into the hole until the ditance between the end surface the casing and the concrete base surface is equal to the thickness of the buried plate.

6. Apply torque to the nut with toroue wrench to the given toroue (the range of toroue wrench depends on the type of anchor bol),and test the desian valueof anchor bot with puler: after the desian value is reached the subseouent constructon (5000 sets a roup, 6 sets/groun. And t wll be calculated as 5000sets, when it is less than 5000)

7. Loose the nut on the anchor bolt. and install the buried plate and fix it. And then use a torsion wrench to tiahten it

Changzhou Ningsheng Hardware & Electrical Appliance Co., Ltd. is a professional hardware manufacturing company specializing in wedge anchor bolts and other fastener parts. The company covers an area of 15,000 square meters and is located in Hengshanqiao Town, Changzhou Economic Development Zone, Jiangsu Province.

Since its establishment in 2000, the company now has more than twelve mature automatic production and assembly lines, with an annual output of more than 7000 tons of hardware accessories. The company's main products include: various types of wedge anchor bolts(GB/DIN/ANSI), the hex bolts, the screw, the washers and other products.

Our factory has always been based on good faith management, product quality as the core, customer demand as the guidance, to provide customers with cost-effective products. At present, it has provided high quality products and services for many retailers and many well-known elevator manufacturers in China so far.

Our logistics and packaging are reliable and trustworthy!

The company has a group of high-quality technical personnel, sophisticated equipment, perfect monitoring facilities. We also have GB/T19001-2008/ ISO9001:2008 international quality system certification.