Swipe or use the arrows to view product images.
Fiber Bragg Grating (FBG) Temperature Monitoring System
| Price | $20000.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Fujian, China |
| Popularity | 399 people viewed |
Model NO.:
SRA-M
Installation Type:
It Can Be Installed on The Surface of The Item
Sensing Type:
Optical Fiber Bragg Grating
Contact:
Contact
Output Signal Type:
Analog Type,Digital Type
Production Process:
Fiber Optic Sensor
Material:
Optical Fiber
Measuring Medium:
Fiber Optic Bragg Grating Sensor
IP Rating:
AAA
Certification:
Withstand Voltage, Anti-Interference
Customized:
Customized
Sampling Frequency:
Synchronous Measurement Speed Is 1~100Hz
Resolution Accuracy:
Minimum Value 0.4nm
Dimensions:
430mmx350mmx88mm
Operating Voltage:
220V,50Hz
Wavelength Range:
1525-1565nm
Wavelength Spacing:
Customizable
Connection Type:
FC/APC or FC/PC
Trademark:
Skyray
Specification:
1/4/6/8/16/32/64 channels (can be customized accor
Origin:
China (Mainland)
Product Description
technical parameter
Introduction
The fiber Bragg grating sensor analyzer is suitable for signal demodulation and sensor data acquisition of fiber grating temperature, strain, pressure, displacement and other types of fiber grating sensors.
The fiber Bragg grating sensor analyzer adopts high-power laser light source and high-speed multi-channel parallel light detection technology. Compared with the traditional ASE light source technology, the output light power of the light source is up to 85%, and the output power of the light source is increased by more than 100 times. The cost is reduced by 50%. The effective service life of the light source is increased by more than 10 years, and the weak fiber grating sensing signal caused by the optical fiber transmission line loss of the engineering field or the cascade fault of the optical splitter can be accurately detected.
The fiber Bragg grating sensor analyzer has 1-64 simultaneous measurement channels. The synchronous scanning frequency can be selected from 1 to 100 Hz. The acquisition time of each measurement channel is strictly synchronized. Each channel can be connected with 1-40 sensors. Online calibration of the wavelength reference module eliminates the need for calibration after delivery and guarantees ±1 pm measurement accuracy over the operating temperature range.
The fiber Bragg grating sensor analyzer has built-in low-power embedded processor, which is stable and reliable. It takes into account the long-term online monitoring in the industrial measurement field and the mobile measurement in the field. It has both portable and desktop chassis specifications. Flexible choice of demand.
Applications
Online monitoring of power and chemical equipment temperature
Industrial fire alarm automatic alarm
Industrial production temperature and pressure measurement
Bridge structure health monitoring
Dam stress and deformation monitoring
Features
High precision
High reliability
Fast measurement
1-64 channel capacity for smooth expansion
Compatible with similar fiber grating sensors from domestic and foreign manufacturers
| Number of channels | 1/4/6/8/16/32/64 channels (can be customized according to customer requirements) |
| Capacity per channel | Temperature: 1-40; strain: 1-18; displacement: 1-12; pressure: 1-12 |
| Wavelength spacing | Minimum value 0.4nm |
| Sampling frequency | Synchronous measurement speed is 1~100Hz |
| Dimensions | 430mm × 350mm × 88mm |
| temperature | Resolution: 0.1 ° C; measurement accuracy: ± 0.5 ° C |
| strain | Resolution: <0.1% F.S.; Measurement accuracy: <0.3% F.S. |
| Displacement | Resolution: <0.1% F.S.; measurement accuracy <0.3% F.S. |
| Remote monitoring capability | 40 km; special requirements can be customized |
| Operating Voltage | 220V±10%,50Hz |
| Maximum power consumption | Typical value: 30W; maximum: 40W |
| Data interface | Support 10M Ethernet port, RS485 output |
| Working environment / working humidity | -10~55°C/0~80%RH without condensation |
| Storage environment / storage humidity | -20~80°C/0~95%RH without condensation |
| Wavelength range | 1525~1565nm |
| Wavelength resolution | 1pm |
| Wavelength repeatability | Typical value: 1pm; maximum: 2pm |
| Wavelength accuracy | ±3pm |
| Optical interface | FC/APC |
| Dynamic detection range | Output optical power: 0 ~ -20dB, minimum detectable optical power: -70dB (allows fiber line loss close to 50dB, ie 100000 times) |
| software | Based on WINDOWS operating system; standard MODBUS communication protocol interface; provide DLL dynamic link library or define corresponding software communication protocol according to user requirements. |
Introduction
The fiber Bragg grating sensor analyzer is suitable for signal demodulation and sensor data acquisition of fiber grating temperature, strain, pressure, displacement and other types of fiber grating sensors.
The fiber Bragg grating sensor analyzer adopts high-power laser light source and high-speed multi-channel parallel light detection technology. Compared with the traditional ASE light source technology, the output light power of the light source is up to 85%, and the output power of the light source is increased by more than 100 times. The cost is reduced by 50%. The effective service life of the light source is increased by more than 10 years, and the weak fiber grating sensing signal caused by the optical fiber transmission line loss of the engineering field or the cascade fault of the optical splitter can be accurately detected.
The fiber Bragg grating sensor analyzer has 1-64 simultaneous measurement channels. The synchronous scanning frequency can be selected from 1 to 100 Hz. The acquisition time of each measurement channel is strictly synchronized. Each channel can be connected with 1-40 sensors. Online calibration of the wavelength reference module eliminates the need for calibration after delivery and guarantees ±1 pm measurement accuracy over the operating temperature range.
The fiber Bragg grating sensor analyzer has built-in low-power embedded processor, which is stable and reliable. It takes into account the long-term online monitoring in the industrial measurement field and the mobile measurement in the field. It has both portable and desktop chassis specifications. Flexible choice of demand.
Applications
Online monitoring of power and chemical equipment temperature
Industrial fire alarm automatic alarm
Industrial production temperature and pressure measurement
Bridge structure health monitoring
Dam stress and deformation monitoring
Features
High precision
High reliability
Fast measurement
1-64 channel capacity for smooth expansion
Compatible with similar fiber grating sensors from domestic and foreign manufacturers
- Similar Products
Negotiable
1 Piece (MOQ)
Wall Mounted Molten Steel Thermometer
Xinji Kexin Metallurgical Equipment Co., Ltd.
Negotiable
1000 Pieces (MOQ)
Gas Oven Thermocouple for Kitchen
Ningbo Jiali Gas Appliance & Science and Technology Co., Ltd.