Free Samples FTTH Heat Shrink Tube 45mm Fiber Optic Fusion Splice Protection Sleeve

Free Samples FTTH Heat Shrink Tube 45mm Fiber Optic Fusion Splice Protection Sleeve

Product Description

Sleeves Consist of cross linked polyolefin, hot fusion tubing and stainless reinforcing steel rod which keep optic transmission properties of optical fiber and enhance the protection to optical fiber splices. Optic Fiber Protective Sleeve is applied to protection fiber optical splice. It is made up of stainless reinforcing steel rod, heat shrinkable tubing and cross linked polyolefin. Rebuild the covering layer of the fiber and provide excellent mechanical strength in the joint. Guarantee good optical transmission performance. Easily operating to the optical fiber during installation without damaging and clear sleeve make it easy to detect splice before shrinkage.

Fiber Optic Sleeve Characteristics

Single holed (pre-shrunk)
Clear sleeve design
Smooth stainless steel reinforcing member
Sealing structure suitable to temperature
Extended liner length
Low shrink temperature
Pre installed stainless steel or ceramic rod
Accommodates single or ribbon fibers
Wide range of sizes
Operating temperature -45degree to 100degree
Min. full recovery temp: 120degree
 

Fiber Optic Sleeve Application

Fusion splicing
Fiber cable protecting
 

Product Features

Name: Fiber Optic Protection Sleeve

Type Application: Single fiber or Ribbon fiber

Material: PE heat shrink tube, fusion tube, 304 steel rod

Length: 60 mm or Customized Request

Tubing Outer Diameter: 3.0, 2.6, 2.4, 2.2, 1.3mm or Customized Request

Steel Rod Diameter: 1.5, 1.2,1.0, 0.8, 0.5mm or Customized Request

Working Temperature: -45 ºC to + 110 ºC

Shrinking Temperature Range:120 ºC

Density: 0.94G/Cm3

Elongation at Break: 700%

Tensile Strength: 18m PA

Standard Color: Clear

Other Color Available

White, Blue, Grey, Yellow, Brown, Black,

Orange, Pink, Red, Cyan, Green, Purple

fiber Optic patchcord.fiber optic jumper cables,

fiber optic patch cable