Swipe or use the arrows to view product images.
Full Automatic Bottle Inverter Sterilizer for Beverage
| Price | $13000.00 |
|---|---|
| Min Order | 5 Pieces |
| Availability | In Stock |
| Shipping From | Jiangsu, China |
| Popularity | 247 people viewed |
Model NO.:
LG
Type:
Weighing-type Filling Machine
Automatic Grade:
Automatic
Material Type:
Liquid
Filling Valve Head:
Multi-Head
Feed Cylinder Structure:
Multi-Room Feeding
Dosing Device:
Capacity Cup
Filling Principle:
Pressure
Packaging Container Lifting Structure:
Pneumatic Lifting
Structure:
Rotary
Packaging:
Bottle
Packaging Material:
Plastic
Use:
Bottle Inverter Sterilizer
Uses:
to Sterilize Interspaces in The Mouths or Capsules
Material:
Stainless Steel 304
Automation:
Full Automatic
Trademark:
jinrong
Transport Package:
Wooden Case
Specification:
ISO9000 CE
Origin:
Jaingsu Province Zhangjiagang City
HS Code:
8422301090
Product Description
This machine is mainly used to sterilize the interspaces which can not be
reached by high temperature materials in the mouths or capsules of bottles after the beverage like tea or juice has been hot filled and closed over. After the product being filled and closed over, the bottle shall be inverted 90°automatically and put flatware by the machine, and the inner of the bottle shall be sterilized through the high temperature of the materials and then bottle shall be put vertically and enter into the spray cooler. The machine runs steadily and reliably and does no harm to the bottles body while the transmission speed can be adjusted steplessly because the transmission chains are imported to install in the machine.
This machine is mainly used to sterilize the interspaces which can not be
reached by high temperature materials in the mouths or capsules of bottles after the beverage like tea or juice has been hot filled and closed over. After the product being filled and closed over, the bottle shall be inverted 90°automatically and put flatware by the machine, and the inner of the bottle shall be sterilized through the high temperature of the materials and then bottle shall be put vertically and enter into the spray cooler. The machine runs steadily and reliably and does no harm to the bottles body while the transmission speed can be adjusted steplessly because the transmission chains are imported to install in the machine.
reached by high temperature materials in the mouths or capsules of bottles after the beverage like tea or juice has been hot filled and closed over. After the product being filled and closed over, the bottle shall be inverted 90°automatically and put flatware by the machine, and the inner of the bottle shall be sterilized through the high temperature of the materials and then bottle shall be put vertically and enter into the spray cooler. The machine runs steadily and reliably and does no harm to the bottles body while the transmission speed can be adjusted steplessly because the transmission chains are imported to install in the machine.
This machine is mainly used to sterilize the interspaces which can not be
reached by high temperature materials in the mouths or capsules of bottles after the beverage like tea or juice has been hot filled and closed over. After the product being filled and closed over, the bottle shall be inverted 90°automatically and put flatware by the machine, and the inner of the bottle shall be sterilized through the high temperature of the materials and then bottle shall be put vertically and enter into the spray cooler. The machine runs steadily and reliably and does no harm to the bottles body while the transmission speed can be adjusted steplessly because the transmission chains are imported to install in the machine.
| No. | Symptom | Cause | Remedy |
| 1 | difference result of sealing-cutting | A. Abnormal air pressure which is lower than 0.5Mpa B. Bad connection of the knife C. Insufficient amount of film | A. Check pressure gauge and compressor to find solution B. Switch off, restore cylinder after exhaustion; ensure no gap exist between knife and base C. Adjust time and speed of film-loading |
| 2 | Off-tracking of conveyer-belt | A. Unsteady pole is loose B. Unsuitable tautness of the conveyer-belt | A. Tighten the above unsteady pole and the below. B. Adjust driven roller feeding regulator |
| 3 | Knife cutting the goods | A. Shaping board can not press packing goods | A. Adjust height of board to get appropriate pressure of the board |
| 4 | Too many wrinkles on the surface of the goods after thermal shrink |
| A. Adjust magnetic switches of forward-pushing cylinder to achieve appropriate length of stroke. B. Select shrink film with appropriate width C. Normal situation as wrinkles appear on the bottom of two sides |
- Similar Products
$45000.00
1 Piece (MOQ)
Fully Automatic Eight Head Filling and Capping Machine
Shantou Shunyi Machinery Industry Co., Ltd.