Fused Silica, H-K9l, CNC Shaped Precision Optics Components

We are manufacturers of Precision optics & Optical Components viz. Windows, Prisms, Lens, Optical coating Mirrors, Beam splitters, Filters, Band pass, Reticles, Optical flats, Cylindrical lens, Prism cement, etc. We are partners to our customers, providing high-quality solutions meeting demands. The high quality of our products and services, and the satisfaction of our customers are our ultimate objectives. These objectives are based on the benchmark of compliance with the statutory and official regulations, where different requirements exist depending on the market. We are constantly developing our products, technologies, and services in the interests of our customers and partners. In doing so, we comply with international standards in accordance with ISO 9001 for quality management. Please find below a short description of our Fused Silica, H-K9L, CNC Shaped Precision Optics Components

OEM optical components most of them are from customer design, we just work out the CNC machining, shaping, polishing, coating, and delivery the samples for quality confirmation. 

Mostly they are for the R&D, also for bulk production once the project gets confirmed. 

PHYO can supply many different types of the OEM optical components based on customer design and requirements.

CNC Shaping products with precise chamfer on the edges or corners, even in some diffuser case, due to the chamfer still need to polish, so the precise of the chamfer is especially important, otherwise big gaps or unconformity will happen during assembly process. PHYO use CNC machining for the profiling and chamfer, to make sure the precise of the size and shapes.

. 

Our capabilities include:

• Inner knife cutting
• Numeric cutting
• High accuracy Single side polishing
• Double side polishing
• High speed Prism grinding
• CNC machines for grinding & polishing for lens
• Thermal Evaporation coating
• Vacuum coating
• Sputtering coating
• Ultrasonic cleaning

Manufacturing limits:

• Tolerance: +0.00/-0.01
• Flatness: L/20 for optical flats
• Surface quality: 10-5 laser standard
• Coating: Single layer, multi layers, dielectric coating, polarizer coating, etc.
• Other specs as per customer request 

To ensure higher quality and accuracy, our products go through many check points:

• Zygo to test Flatness
• Spectrometer for Coating curve
• Collimators for Centration
• Projectors for High Precision Chamfers
• Microscope
• Size image magnifier
• Prism angle tester

 We also do custom based orders based on customer requirements and support for R&D project purposes