GB4250/85 Double Column Semi Automatic Cutting 500mm Metal Band Saw Machine

Character:

1. Using a hydraulic clamping structure, the workpiece can enter the sawing position from behind the sawing machine, and use clamps to fix the workpiece and perform sawing.
2. Design its own unique sawing tape guide clamping device to improve the working conditions of sawing tape, extend its service life, and reduce noise to reduce environmental pollution.
3. Double hydraulic cylinder design, with two diameter columns to form a solid sawing structure.
5. The oil pressure system and the saw bed are separated into separate closed structures. The hydraulic station is equipped with a temperature control system, which can ensure that the hydraulic system works normally under harsh ambient temperatures(working temperature ≤ 60 degrees, and the cooling system can prevent the hydraulic oil temperature from rising; To prevent oil viscosity decrease, oil leakage increase; Prevent premature aging of seals; To prevent air erosion caused by oil saturation and steam rise; Prevent oil and liquid oxidation, precipitate, and incur fatal failures such as preventing pump and valve movement, affecting normal sawing.
6. Centralized button switch control panel, electrical components use Zhengtai products.
The quality and main accessories of GB4250 gantry strip sawing machine are described below:
The double column horizontal belt saw machine is the metal belt saw machine designed and manufactured by our company. The structure is scientific and reasonable, the appearance is generous, the cutting efficiency is high, and the service life of the saw bar is long. It is an ideal discharge equipment for large and medium materials.

Main features:
1. Double column and double cylinder structure greatly increases the service life of the machine tool and the full service life of the saw blade.
2. Cutting speed hydraulic control, stepless speed adjustment.
3. Saw wire speed adopts triangular band five speed adjustment.
4. Saw-cutting is stable and has high accuracy.
5. Hydraulic pressure is used to tighten the work clip, which is convenient for operation.
6. Electric materials can be used for work.
The company adopts high quality materials, precision machine tools, and processes according to the process specifications.
1. Transmission components
The worm wheel is made of tin bronze materials and is processed on a precision roller hob using a precision worm hob. After harrowing, the worm is ground in a precision worm grinder with high surface finish and high precision. The box body adopts HT250 cast iron, which guarantees the processing accuracy with the special boring mode, and the worm wheel has a long service life.
2. Double columns
Hard Chrome surface grinding is very wear-resistant, its guide sleeve is made of self-wear wear resistant materials, no crawling phenomenon will occur during the work, the two of the small gap, good rigidity, good vertical sawing section.
3. Hydraulic components
The inner wall of the cylinder and the piston are both hard Chrome Plated and sealed with the world famous brand. Therefore, there is no crawling leakage and high durability.
4. Electrical component
wiring tidy, reasonable structure, strong heat dissipation. Main electrical components use Zhengtai products.