Gatexpert Industrial Sectional Door Opener

The model INDUS60E is our new sectional door opener, the inside motor specification is 400W and it can afford the 25 square meters doors, with 60N.m output torque, the motor weight is 14kg and the control unit weight is 3kg.

This product is commonly used for the industrial sectional door which was equipped with balance spring and lifting industrial door. There are two installation ways for this product: shaft drive installation and chain drive installation. The factory standard configuration is for shaft drive installation. If users require chain drive type, they can choose the appropriate sprocket chain accessories for installation needs.

1. Electric limit switch, can make you convenient to set the function and installation.
2. You can add 25pcs remotes on this control unit.
3. It can work in the temperature of -20ºC~+50ºC, it is suitable for low temperature region.
4. The motor size is 232×151×368mm, you can check if it can be installed on your place.
5. Can be connected to other exit device, such as wireless keypad, warning light,etc.

1. Before you bought this INDUS60E industrial sectional door opener, please note that the power supply should be AC220V±10%.
2. Please read our user manual of this in industrial sectional door opener carefully before installation.
3. The industrial door operator should be installed and put into operation by qualified personnel.
4. To ensure the safety of pedestrian and vehicle, it's recommended to install the infrared protection and airbag protection devices.