Geogrid PP Biaxial 30kn-30kn

A geogrid is geosynthetic material used to reinforce soils and similar materials. Geogrids are commonly used to reinforce retaining walls, as well as subbases or subsoils below roads or structures. Soils pull apart under tension. Compared to soil, geogrids are strong in tension. This fact allows them to transfer forces to a larger area of soil than would otherwise be the case.

Geogrids are commonly made of polymer materials, such as polyester, polyethylene or polyproylene. They may be wovern or knitted from yarns, heat-welded from strips of material, or produced by punching a regular pattern of holes in sheets of material, then stretched into a grid.


Biaxial Plastic Geogrid for highway road railway building material

Made from polymer and nanometer carbon black by extrusion method.




Specification of Biaxial Plastic Geogrid for highway road railway building material:

I. TGSG1515, TGSG2020, TGSG2525, TGSG3030, TGSG3535, TGSG4040, TGSG4545, TGSG5050
TGSG6060 and so on
2. Width from 2m t0 6m

Used in highway, railway, port, airport and municipal project. Support in the recovery working face of coal mine and roadway in the coal mine.
Property of Biaxial Plastic Geogrid for highway road railway building material:
L. Lm p rove road bed bearing ca pacity, enla rge road lifetime
2. Prevent road collapse and crack
3. Prevent soil and water loss in slope
4. Could replace steel-plastic geogrid in coal mine

Application of Biaxial Plastic Geogrid for highway road railway building material:
I. Reinforcement in dam and roadbed
2. Slope protection
3. Wall reinforcement
4. Roadbed bearing capacity improvement in airfield, parking lot and wharf

Production standard of Biaxial Plastic Geogrid for highway road railway building material:
GB/T17689-2008
JT/T 480-2002