Swipe or use the arrows to view product images.
Good China Supply Plastic and Rubber Raw Materials TPU/TPE/TPR/ /Sis/EPDM/SBR/Sbs/SEBS
| Price | $1850.00 |
|---|---|
| Min Order | 1 Ton |
| Availability | In Stock |
| Shipping From | Hebei, China |
| Popularity | 497 people viewed |
Model NO.:
sbs
Carrier:
Sbs
Color:
White
Certification:
RoHS, ISO, CE
CAS No.:
25038-54-4
Formula:
C6h11no
Einecs:
211-024-8
Material:
Polyamide(Nylon 6.66)/PA
Usage:
General Plastics, Engineering Plastics, Specialty
Plastic Properties After Heated:
Thermosetting Plastic
Model No:
70g13L
Plastic Forming Method:
Injection
Form:
White Particle
Density:
1.08 - 1.16
Other Performance:
Low Viscosity High Flow Flame Retardant
Performance:
Transparent Wear Resistance
Bending Strength:
90.0MPa
Shrinkage Rate - Flow:
2.8
Proportion:
1.13
Trademark:
Hebei Rongxintong Industrial Co., Ltd
Transport Package:
Bag
Specification:
25KG/bag
Origin:
China
HS Code:
2828100000
Product Description
Polyamide resin, English name is polyamide, short for PA. Commonly known as Nylon, it is a general term for polymers containing amide groups in the backbone repeat unit of macromolecules. Among the five engineering plastics, it has the largest output, the largest variety and the widest use. The main varieties of nylon are nylon 6 and nylon 66, which occupy an absolutely dominant position. Nylon 6 is polycaprolactam, while nylon 66 is polyhexanediamine adipate, nylon 66 is L2 % harder than nylon 6; Followed by nylon 11, nylon 12, nylon 610, nylon 612, in addition to nylon 1010, nylon 46, nylon 7, nylon 9, nylon 13
| NO. | Item | Unit | GB/T 23615.1-2009 | PW-Technical specification |
| Material Properties | ||||
| 1 | Density | g/cm3 | 1.3±0.05 | 1.28-1.35 |
| 2 | Linear expansion coefficient | K-1 | (2.3-3.5)×10-5 | (2.3-3.5)×10-5 |
| 3 | Vicat softening temperature | ºC | ≥230ºC | ≥233ºC |
| 4 | Melting point | ºC | ≥240 | ≥240 |
| 5 | Testing for tensile cracks | - | No cracks | No cracks |
| 6 | Shore hardness | - | 80±5 | 80-85 |
| 7 | Impact strength(Unnotched) | KJ/m2 | ≥35 | ≥38 |
| 8 | Tensile strength(longitudinal) | MPa | ≥80a | ≥82a |
| 9 | Elasticity modulus | MPa | ≥4500 | ≥4550 |
| 10 | Elongation at break | % | ≥2.5 | ≥2.6 |
| 11 | Tensile strength(transverse) | MPa | ≥70a | ≥70a |
| 12 | High temperature tensile strength(transverse) | MPa | ≥45a | ≥47a |
| 13 | Low temperature tensile strength(transverse) | MPa | ≥80a | ≥81a |
| 14 | Water resistance tensile strength(transverse) | MPa | ≥35a | ≥35a |
| 15 | Aging resistance tensile strength(transverse) | MPa | ≥50a | ≥50a |
Widely used in the manufacture of machinery, automobile, chemical and electrical equipment parts, such as gear, roller, pulley, roller shaft, pump impeller, fan blade, high pressure sealing, valve seat, gasket, bushing, all kinds of handle, support frame, wire package inner layer, etc.
- Similar Products
Negotiable
24 Tons (MOQ)
Fireproof Masterbatch PE Raw Material Factory
Suzhou Eco Nano Materials Technology Co., Ltd.