Good PU Foam Glue Cheap One Component CFC Free Polyurethane Spray Gap Filling PU Foam

ABOUT WONSTAR

WONSTAR, the esteemed company in china established more than one decade which specialist in adhesive product, such as silicone sealant, polyurethane foam, epoxy tile sealant, pvc/cpvc glue and other adhesive  . With more than one decade development,  WONSTAR product is well known at home and abroad. Stick to the principle of winning the market by quality and credibility. From choosing of raw materials, preproduction inspection to inspection of semifinished and finished products. WONSTAR makes greatest efforts in the whole process. WONSTAR's target is to consistently pursue stability of product quality. With more than one decade efforts, WONSTAR win more and more customers. We believe with our efforts and customer's supports, WONSTAR will bring newpage of adhesive.

 

Descriptions:
 
1.Door insulation pu foam is a one component plyurethane foam used to seal gaps and crevices on window, door etc;
2.The foam that dispenses from the aerosol can is moisture cured and draws humidity from the air for cure;
3.Pu foam is widely used in sealing around doors, windows,pipes,indoor fittings or any other applications in construction.
4.Provides an excellent bond to lumber,plywood,concrete,metals,masonry and other substrates.

 

Way to apply:
1.Shake can well to make the foam ready for use;
2.Clean the substrate and spray some water on it;
3.Screw foam dispenser on tightly and turn can upside down;
4.Vertical fill the gaps from the bottom upwards;
5.Foam is tack-free(dry to the touch) in 8 to 10 minutes in temperatures between +18°C and + 25 °C(65 °F-77 °F). Higher temperature will result in faster setup times;
6.Remove unwanted cured foam by cutting it with knife.


Package&shipping:
1.12/15 TIN per carton;
2.private lable five ply carton;
3.nozzel inside carton;
4.packing belt avaliable if requested;
5.300ml/500ml/750ml/by drum
6.1296cartons/20'container for 750ml




Features:
1.Foam Color: white
2.Tack free time:10minutes
3.Cut through:One hour
4.Processing temperature:+5 °C- +35 °C(+41 °F to +95  °F)
5.Optimum processing:+18°C to +25 °C(+64.4 °F to +77 °F)
6.Short-term resistance range:-40 °C to +110 °C(-40 °F to +230 °F)
7.Long-term resistance range:-30 °C to 80 °C(-22 °F to +176 °F)





PU FOAM SAFTY:
1.Keep out of children's reach ;
2.Keep upright;
3.Shelter from direct sunlight;
4.Do not expose to temperatures exceeding 50°c(122°F);
5.Do not pierce or burn even after use;
6.No smoking during the whole spraying procedure.
Read instructions carefully before using. During application avoid contact with skin. Wear gloves ! Can contains small parts of inflammable propellant. Therefore,ventilate carefully during working and avoid open fire and use of electrical equipment etc.

Company Informations.