Swipe or use the arrows to view product images.
Grow K215-V1.3+R502-a Fingerprint Access Control Board for Car
| Price | $22.80 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Zhejiang, China |
| Popularity | 401 people viewed |
Model NO.:
K215-V1.2+R503-A
Voice Service:
Without Voice Service
Clock:
Without Clock
Color:
as Picture
Screen:
as Picture
Communication Interface:
RS232
Fingerprint Capacity:
200
Power Supply:
DC 10V--30V
Standby Current:
40mA
Trademark:
GROW
Transport Package:
Standard Export Carton Package
Specification:
Power supply: DC 10V--30V
Origin:
China
HS Code:
8471609000
Product Description
K215-V1.3 Technical Parameters
·Power supply: DC10--30V,·Stand-by current for control board: 40mA
·Fingerprint capacity: 200
·Size: 36.4*70mm
·Relay Function: Normally Open or 1-20 second
·LED can off in sleep mode: long press (about 10s) the SET button, LED will be off in sleep mode.
K215-V1.3 Operation Instruction
1. Press SET button shortly,system in register state and blue indicator light flash fast, place your finger in the collection area, fingerprint register successful when hearing music;Fingerprint can be registered continuously when system in register state; if no need adding fingerprint more, waiting a few seconds.
2. When back to factory default, press SET button until hear "Di" and music,means initialization operation successful.
3. Mode Selection Usage: when chose 2, operating time of the relay is 1s-20s after pass fingerprint,can adjust by knob. When chose 1, relay operated when fingerprint passed, and then relay released when fingerprint passed again, relay operated and released circularly. Relay released when power off.
Note:
In factory status, any fingerprint can pass, after register fingerprints, this function is invalid;
Set sleep mode, long press (about 10s) the SET button and do not release your finger until hearing the "DiDiDi" sound and the music,means initialization operation successful.
K215-V1.3 has a wide range of use, which can be used in automobile control, access control and other occasions.
K215-V1.3 can be connected with R300,R301T,R302,R303T,R307,R501,R502,R502-A,R502-AW,R503 fingerprint module.
R502-A Specifications
| Model | R502-A |
| Type | Capacitive Fingerprint Module |
| Interface | UART(TTL) |
| Resolution | 508 DPI |
| Voltage | DC 3.3V |
| Fingerprint Capacity | 200 |
| Sensing array | 192*192 pixel |
| Working current | 20mA |
| Standby current | Typical touch standby voltage: 3.3V, Average current: 2uA |
| Fingerprint module external size | Diameter 22 (mm) |
| Fingerprint module inner size | Diameter 19.5 (mm) |
| Fingerprint module height | 5 (mm) |
| Effective collection area | Diameter 15.5 (mm) |
| Connector | MX1.0-6Pin |
| LED Control | YES |
| LED Color | Purple and Blue and Red |
| Scanning Speed | < 0.2 second |
| Verification Speed | < 0.3 second |
| Matching Method | 1:1; 1:N |
| FRR | ≤1% |
| FAR | ≤0.001% |
| Work environment | -20C ---60C |
| Work Humidity | 10-85% |
| Anti-static capacity | 15KV |
| Abrasive resistance intensity | 1 million times |
| Communications baud rate (UART): | (9600 × N) bps where N = 1 ~ 12(default N = 6, ie 57600bps) |
Files
·Provide Free Reference SDK Files for Arduino, Android,.Net,Windows and so on.·Provide User Manual
K215-V1.2 Test video on Youtube: https://youtu.be/bRQP0JuzqYo
If need SDK files.
- Similar Products