Hdr-240-48 Single Output Industrial DIN Rail Power Supply 240W

240W Single Output Industrial DIN Rail Power Supply (HDR-240-48)
input 100-240V AC to DC output 48V 5A, CE ROHS ISO9001

Features:
·Universal AC input / Full range
·Built-in active PFC function
·Protections: Short circuit/ Over load/ Over voltage / Over temp.
·Cooling by free air convection
·Can be installed on DIN rail TS-35/7.5 or 15
·LED indicator for power on
·100% full load burn-in test
·Fixed switching frequency at 100KHz
·3 years warranty
·Dimensions: 125.5*125.2*100mm (W*H*D)

Specification:

1) INPUT
·Voltage Range: 88-264VAC, 120-370VDC; 47-63Hz
·AC Current: 2.8A/115VAC 1.4A/230VAC
·Inrush Current: Cold start 27A/115V 45A/230V
·Leakage Current: <3.5mA/240VAC

2) PROTECTION
·Over Load: 105%-150%; Constant current limiting, recovers automatically after fault condition is removed.
·Over Voltage: 30-36V for 24W, 54-60V for 48W; Shut down o/p voltage, re-power on to recover.
·Over temp.: 100ºC±5ºC(TSW1); Shut down o/p voltage,recovers automatically after temperature goes down.

3) ENVIRONMENT
·Working Temp. & Humidity: -10ºC~+70ºC; 20%~90% RH.
·Storage Temp. & Humidity: -20ºC~+85ºC; 10%~95% RH.
·Vibration: 10~500Hz, 2G 10min./1 cycle, period for 60min, each along X, Y, Z axes.

4) SAFETY STANDARDS
·Withstand Voltage; I/P-O/P: 3KVAC; I/P-FG: 1.5KVAC; O/P-FG: 0.5KVAC
·Isolation Resistance: I/P-O/P, I/P-FG, O/P-FG: 100MΩ/500VDC
·Safety Standards: Design refer to UL508, UL60950-1, TUV, EN60950-1
·EMC Standards: Design refer to EN55011, EN55022, EN61000-3-2,-3, EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2(EN50082-2)

5) OUTPUT
Type No | Output | Tol. | R&N | Effi.

HDR-240-24 | 24V, 10A | ±1% | 80mVp-p | 84%
HDR-240-48 | 48V, 5A | ±1% | 150mVp-p | 85%