Heatless Adsorption Compressed Air Dryer Heatless Desiccant Dryer

 

Advantage:
1. The excellent design of the two tower
It can ensure activated aluminium oxide contact time enough to dry the saturated wet air entering in dryer to the needed dew point, 30% extra desiccative can compensate the desiccative consumption and ensure the life time, then guarantee the best performance

2. Adopts the large scale diffuser
To ensure the air stream well proportioned to get through the desiccative level

3. Reliable controlling system

3.1 Within 10 minutes period dry the compressed air to very low dew point of - 40 centigrade or within 4 minutes period dry to -70 centigrade, and can be conditioned at site

3.2 Micro CPU control way, and the PLC control is optional

4. System Pressure drop is lower than 0.02MPa

5. Easily operation & easily maintenance
Power on-off switch, the period mode setting, power on light, regenerative on light

 

Technical specification:
Rated Inlet Temperature: No more than 38 centigrade
Maximum inlet temperature: No more than 49 centigrade
Inlet oil content: Less than0.1ppm
Outlet Pressure Dew Point: -40 centigrade (70 centigrade below zero is optional)
Adsorbent: Activated alumina or molecular sieve
Rated Working Pressure: 0.6~1.0MPa(1.0MPa or above is optional)
Pressure loss: 0.02MPa
Control Model: CPU (standard configuration), PLC is optional
Working Mode: Automatic switching between tower A and tower B, continuous working
Regeneration Way: Heatless regenerative
Regeneration Air Consumption: 14%
Cycle Period: 4~10min, adjustable
Power Supply: 220V/50Hz

 

Parameters above are for your reference. Please contact us for large scale specific information.

overseas market installation and commissioning service is provided according to customer demand