High Effective Biomass Rotating Charcoal Carbonization Machine for Agro Based Industries

Biomass two-layer continuous drum carbonization machine is a special carbonization equipment which can carbonize coconut shell, walnut shell, apricot shell, hemp pole, sawdust, sawdust, rice husk, bamboo, eucalyptus, mushroom residue, medicine residue, furfural residue, coffee residue, palm shell.

The biomass two-layer continuous drum carbonization machine is a professional equipment for continuous high-temperature heating and carbonization of biomass under anaerobic and oxygen-poor conditions. It consists of a two-layer carbonization machine, a pre-burner (or gasification furnace), and combustible gas purification It consists of device, external heating furnace of carbonization machine, feeding conveyor, cooling carbon machine and control. The biomass is transported by the conveyor into the inner drum. The waste heat in the furnace is used to dry and preheat the material to 200-250°C. It then enters the outer drum for high-temperature carbonization. There is a combustible gas recovery pipe at the end of the outer drum to complete the carbonization process. The CO, CH_four, C_twoH_six and other gases produced in the flue gas purification system separate the wood tar, wood acid liquid, water and ash substances to obtain pure combustible gas. The wind is sent to the external heating furnace of the carbonization machine, fully burned, and heated to the carbonization machine. , to achieve the purpose of reciprocating heating, carbonization, and continuous production. The carbonized product is discharged through a water-cooled charcoal discharge machine, and the carbonization ignition is supplied with heat by a preheating burner (or gasification furnace).

1. Strong material adaptability. Biomass with a moisture content of less than 20% and a particle size of less than 30 mm can be carbonized;

2. The quality of carbon products is good, and the carbonization rate is high. Carbon products can be used not only as fuel carbon, but also as raw materials for agricultural carbon, metallurgical carbon and activated carbon;

3. Strong carbonization depth control ability. The residual volatile matter of charcoal products is 10-25%, which can be controlled on demand;

4. The equipment is safe and environmentally friendly, stable in operation and long in service life. Choose a large number of new materials and new processes, adopt patented technology design, precision production, after a lot of practical tests, every detail is perfect, to ensure the quality of each set of equipment.

Founded in 2003, Zhengzhou Jiutian is an enterprise with 200 employees committed to enhancing clients productively, profitability, and safety.

Jiutian Machinery products include continuous charcoal making machine, horizontal carbonization furnace, vertical carbonization stove, activated carbon plant, briquette machine, drying machine, etc.