Swipe or use the arrows to view product images.
High Efficiency EDR DIN Rail Single Output Switching Power Supply AC to DC 12V 75W Adjustable SMPS
| Price | $10.50 |
|---|---|
| Min Order | 20 Pieces |
| Availability | In Stock |
| Shipping From | Zhejiang, China |
| Popularity | 466 people viewed |
Model NO.:
EDR-75W-12V
Output Type:
Single
Warranty:
2 Years
Output Power:
51 - 100W
Input Voltage:
110-220V
Connection Mode:
Series Switching Power Supply
Starting Mode:
Self-excited Switching Power Supply
Voltage Regulating Mode:
Frequency Modulation Type
Power Supplying System:
Terminal Power Distribution Equipment
Energy Transmission:
One-way Transmission
Modulation System:
PWM
Certification:
CE, RoHS
Brand:
Chux
Output Voltage:
12V
OEM:
Yes
Size:
32*125.2*113.5mm (W*H*D)
Weight:
0.55kg
Walt:
75W
Trademark:
CHUX
Transport Package:
Normally Export Packing
Specification:
CE. ROHS
Origin:
China
HS Code:
8504401990
Product Description
High Efficiency EDR Din Rail Single Output Switching Power Supply AC to DC 12V 75W Adjustable SMPS
1)High Efficiency, High Reliability, Low Cost
2)AC Input Range: 85~264VAC
3)100% Full Load Burn-In Test
4)Protections: Short Circuit / Over Load/Over Voltage
5)LED Indicator For Power On
6)Cooling By Free Air Convection
7)Approvals: CE RoHS
8)2 Years Warranty
Features:
1. Universal AC input/ Full range
2. Installed on DIN rail TS35/ 7.5 OR 15
3. Protection: short circuit/ over-load/ over-voltage
4. No load power consumption <0.75W
5. LED indicator for power on
6. DC OK signal output (10W)
7. DC OK relay contact (40W&60W)
8. Cooling by free air condition
9. 100% full load burn-in
10. 2 years warranty
| SPECIFICATIONS | |||
| OUTPUT | |||
| Model | EDR-75-12 | EDR-75-24 | EDR-75-48 |
| DC Voltage | 12V | 24V | 48V |
| Rated Current | 6.3A | 3.2A | 1.6A |
| Current Range | 0-6.3A | 0-3.2A | 0-1.6A |
| Rated Power | 75.6W | 76.8W | 76.8W |
| Ripple & Noise | 100mVp-p | 120mVp-p | 150mVp-p |
| Voltage Adj. Range | 12-14V | 24-28V | 48-53V |
| Voltage Tolerance | ±2% | ±1% | ±1% |
| Setup, Rise Time | 1000ms,60ms/230VAC 1800ms,60ms/115VAC at full load | ||
| Hold Up Time | 60ms/230VAC 12ms/115VAC at full load | ||
| Voltage Range | 85~264VAC 47~63 Hz; 120~370VDC | ||
| AC Current | 1.6A/115V 0.96A/230V | ||
| Efficiency | 83% | 85% | 86% |
| Inrush Current | Cold start 20A/115VAC 40A/230VAC | ||
| Leakage Current | <1mA/240VAC | ||
| Over Load | 105%~150% | ||
| Protection type: Constant current limiting, recovers automatically after fault condition is removed | |||
| Over Voltage | 120%~140% | ||
| Protection type: Shut down o/p voltage, re-power on to recover | |||
| Over Temp. | TSW1≥85ºC±5ºC | ||
| Protection type: Shut down o/p voltage, recovers automatically after temperature goes down | |||
| Working Temp., Humidity | -10ºC~+60ºC; 20%~90%RH | ||
| Storage Temp., Humidity | -20ºC~+85ºC; 10%~95%RH | ||
| Vibration | 10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes | ||
| Withstand Voltage | I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC | ||
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC | ||
| EMC Standard | EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-2 | ||
| Dimension | 32.5*11.5*125.2mm(L*W*H) | ||
| Weight | 0.45Kg | ||
| Packing | 30pcs/16Kg/1.1CUFT | ||
| NOTE | |||
| 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation. 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. | |||
1. How we control the quality?
Aging test for 12 hours, after then we put them into the market.
2. Can we accept samples customized?
No problem for samples order, and welcome your testing before your big order.
3. What about the production capacity?
4. days for samples order under 100pcs, 7-15 days for general order under 10000pcs.
4. OEM and ODM are available? Yes, we accept
customized products
5. Will the delivery time be long for a big order?
No, we have two special parts in production line, one for samples orders, another for big orders, so we can control the delivery time as we promise in the contract.
6. What is our warranty service?
For all products we sell have 2 year warranty.
- Similar Products
Negotiable
100 Pieces (MOQ)
800W AC/DC Power Supply for Vending Machine, Payment Terminal, Self-Service Kiosk
Shenzhen Gold Power Tech Co., Ltd.