High-End Aeon Nova16 Super 1610 Wood Engraving Machine with 130W/150W CO2 Glass Tube +RF30W/60W Metal Tube 1200mm/S

1 Q: Can the machine engraving and cutting?

A. Yes, even on the same Job, you can do setting with different colour in the software and also can making holes.

2. Q. Is the machine must work with computer?

A. Must connect with computer with USB cable when you change the settings of machine. for the design files, you can transfer the file with USB memory stick to the machine, Or can download it to the machine directly with USB cable from computer.

3.Q. Can the machine be split so it can fit into my doors?

A. Such as laser engraving cutting machine model of WHL3050, WHL4060, which can the legs separate from the main body of the machine.

4.Q. How long the laser tube is working well?

A. Unfortunately we cannot confirm about this.

it is about 4000+ hours for ordinary co2 laser tube 10,000+ hours for Reci brand co2 laser tube 6000+ hours for Pomelo Laser co2 laser tube

5.Q. Can you explain what the differences are between the different watt laser tubes?

A: Usually,the power of laser tube is decided by two parameters:

1.The length of the laser tube( The longer laser tube,is the more powerful).

2.The Diameter of Laser tube (The bigger laser tube,the more powerful).

AND bigger watt laser tube can cut thicker materials,however,bigger watt has big laser beam,therefore,For engraving ,It's. better to use small watt laser tube like 60watt or 80watt.)

6.Q.How do i know the laser tube is nearly used up?

A:The normal color of the laser beam is purple while working. When a laser tube is dying the color will become white