Swipe or use the arrows to view product images.
High Performance Underground Pipe and Cable Locator Detecting Cable Fault
| Price | $4999.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Tianjin, China |
| Popularity | 447 people viewed |
Model NO.:
RCI-601P
Usage:
Network Cable Tester, HDMI Cable Tester, Audio Cable Tester, Coaxial Cable Tester, Digital Cable Tester
Certification:
CE, RoHS
Customized:
Non-Customized
Output Frequency:
640Hz,1280Hz,10kHz, 33kHz, 82kHz,197kHz
Output Power:
Max. 10W, 10 Levels Adjustable
HMI:
320X240 LCD
Direct Connection Voltage:
Max. 150vpp
Pipe Detection Mode:
Wide Peak,Narrow Peak,Valley Method
Input:
Internal Receiving Loop, Clamp, a Frame
Cable Identification Mode:
Flexible Clamp Intelligent Identification
Trademark:
Grewin
Transport Package:
Export Standard Carton or Customize Strong Pallet
Specification:
RCI-601P INTELLIGENT PIPE LOCATOR
Origin:
China
HS Code:
9030899090
Product Description
GENERAL :RCI-601P is a high performance underground metallic pipe locating system. It consists a transmitter and a receiver, can be used to do route tracing, pipe exploration and depth measurement of the underground cables and metallic pipes.It can also be used to identify target cable from a bunch of cables, locate the pipe insulation damage and part type cable fault.
FUNCTION FEATHER:
- Power frequency: 50Hz/60Hz,250Hz/300Hz
- Radiation frequency passive frequency: center frequency 10kHz, 33kHz, 82kHz
FUNCTION FEATHER:
- Compass display: to display pipe position and left-right direction directly.
- Right/wrong indication: measure the pipe current direction to indicate tracing result correct or wrong and avoid the nearby lines interference under certain frequencies.
- Depth measurement and current measurement and display the signal strength history cursor.
- All digital high accuracy sampling which is stable and reliable with ultra high sensitivity and narrow receiving transmission band to greatly enhance the capacity of resisting disturbance and fully inhibit the power interference and harmonic interference from the nearby running cable and pipe.
- Cable/pipe identification:flexible Clamp (optional) identification and sensor identification. Clamp identification can precisely gives accurate result. sensor (optional) identification could be used when the Clamp identification is not applicable.
- Grounding fault location: Use the booster (optional ) could rise output voltage to max.1000V,and use the A frame (optional) to pinpoint the pipe insulation damaged points against the ground. No need to do zero set and the arrow will point to the fault point direction.
- Multiple locating frequencies support both active detection an passive detection.
- Multiple signal output mode: Direct connection output, Clamp Coupling, Radiation method.
- Large power output of transmitter digital amplifier with auto impedance matching and auto protection.
- Built-in big capacity Li-on batteries series,support auto power off when low battery or long time no operation
- Solid case and light weight easy to carry SPECIFICATION: Transmitter:
- Output: Direct Connection output, Clamp Coupling Output (optional), Radiation output, fault location booster (optional).
- Output Frequency: 640Hz (complex frequency), 1280Hz (complex frequency), 10kHz, 33kHz, 82kHz,197kHz.
- Output power: max. 10W, 10 levels adjustable, auto impedance matching.
- Direct connection voltage: max. 150Vpp.
- Overload and short circuit protection.
- HMI: 320x240 LCD.
- Power supply: 4 X built-in 18650 Li-on batteries, standard 7.4V, 6.8Ah. Receiver:
- Input: Internal receiving loop, Clamp (optional), flexiable sensor (optional),sensor (optional),fault locating A Frame (optional).
- Receiving frequency:
- Power frequency: 50Hz/60Hz,250Hz/300Hz
- Radiation frequency passive frequency: center frequency 10kHz, 33kHz, 82kHz
- Pipe detection mode: wide peak method, narrow peak method, valley method
- Cable identification mode: flexible Clamp (optional) intelligent identification and sensor (optional) identification
- HMI: 320X240 LCD
- Built-in battery: 2 X 18650 Li-on batteries, standard 7.4V,3.4Ah Other:
- Volume: transmitter 280x220x90mm,receiver 680x277x120mm
- Weight: transmitter 2.3 kgs, receiver 2.0 kgs
- Charger: input AC 100~240V,50/60Hz,output DC8.4V,2A
- Temperature: -10-40ºC,humidity 5-90%,elevation <4500m
Items Accessories name Reference fig. And description Qty 1 Receiver accessories connection cable
blue 6-core plug spring wire2 Transmitter accessories connection cable
red 5-core plug3 Transmitter clamp 4 Receiver flexible clamp 5 Booster for fault location 6 A frame for fault location 7 sensor 8 Pole sensor 9 Pole sensor rod
Company introduction
Certificate:
Contact:
Grewin.Beyond
Tianjin Grewin Technology Co.,Ltd.
Web:transformer.en.made-in-china.com
- Similar Products