Swipe or use the arrows to view product images.
4mm-12mm Nm 400, 450, 500 Wear Resistant Steel Plate
| Price | $1800.00 |
|---|---|
| Min Order | 1 Ton |
| Availability | In Stock |
| Shipping From | Shandong, China |
| Popularity | 435 people viewed |
Model NO.:
NM450
Standard:
GB, ASTM
Application:
Loader, Construction Machinery, Metallurgical Machinery, Cement Plant, Mining Machine, Thermal Power Plant, Coal Yard
Material:
Steel
Type:
Wear Resistant Plate
Technique:
Hot Rolled
Shape:
Plate
Surface Treatment:
Color Coated
Size:
6-100mm
Trademark:
HART Industry
Transport Package:
Steel Frame or as Required Package
Specification:
Stock Thickness: From 4 to 100 MM
Origin:
Shandong, China
HS Code:
7210900000
Product Description
High Quality NM500 Hardness 500 Wear/Abrasion resistant steel plate
NM series is a high-strength wear resistant steel plate with high hardness. The Brinell hardness value from 470 to 525 (HBW), and mainly to provide protection in the occasion or part where wear resistance is required, so that the equipment life is longer and the maintenance is reduced.
Typical Applications:
HART-P-100 Plate is widely used in the mining, power generation(Coal), cement, dredging, steel production, waste handling, glass production, and pulp and paper industries. Some specific applications include:
| INDUSTRY | APPLICATONS |
| Mining | Chutes, hoppers, liners for truck beds, dozer blades, shovel buckets, dragline buckets, excavators |
| Cement | Separator guide vanes, discharge cones for clinker storage bins, chutes for sintering ore conveying, outlet ducts for clinker grinding mills, receiving hoppers |
| Dredging | Dredging pipes and pumps, suction pipelines, pump discharges |
| Steel | Dredging pipes and pumps, suction pipelines, pump discharges |
| Power | Coal handling chutes, coal feeder liners, crusher screen plates, classifier cones, journal liners, silo bunkers |
Service:
| SERVICE | DESCRIPTION |
| Cutting | 1. Can be cut by plasma, laser, water jet, arc gouge, and abrasive saw cutting; |
| Welding | 1. Use 480 MPa (70 ksi) or 560 MPa (80 ksi) consumable to join base metal; 2. After welding, joint should be capped by overlay for wear protection. |
| Machining | 1. Not machinable by conventional methods; 2. Can be finished by grinding only; 3. Countersunk holes can be precisely produced by EDM (Electrical Discharge Machining). |
| Forming | 1. Commonly formed with overlay to the inside; 2. For pipes with diameters smaller than 0.6m (24"), hardfacing pipe recommended instead of pipes fabricated from hardfacing plate. |
| Drilling | 1. When drilling, the distance between two holes should be at least 15mm (5/8''); otherwise, the partition may not be strong enough and can crack; 2. The minimum diameter of holes should be equal to the thickness of the plates. For thicker plates with a total thickness over 20mm (3/4''), the minimum diameter should be 1.5 times the thickness of the plate. |
Testing and quality control:
We documented how the product properties are tested in order to make sure the overlay plates fulfil the specified product properties. Including documentation on 3d party's quality system if calibration and testing is performed by 3d party.
- Similar Products
$1.30
100 Meters (MOQ)
Heavy Duty Compressor Air Hose Pipe Clips 3/4 Best Quality
XIAMEN PRODRILL EQUIPMENT CO., LTD.