Blood Glucose Analysis Collection Tube Vacuum Blood Collection Tube

Vacuum Blood Collection Test Tubes Sodium Fluoride Potassium Oxalate Glucose Tube

Glucose tubes are sodium fluoride/potassium oxalate or EDTA / Sodium Fluoride. These tubes are used for glucose determinations.

Product Name: Grey Glucose Tube
Addictive: EDTA/ Sodium Fluoride
Closure Type: Safety Closure
Closure Color: Grey
Material: Glass, PET
Specification: 13x75mm, 13x100mm, 16x100mm
Draw Volume: 2ml~10ml

The tubes contain a glucose stabiliser, which allows you to block the process of glycolysis for up to 24 hours at room temperature.

 

Grey Glucose Tube can be used in hospital, commercial and research laboratories.
 

All Specifications for the blood collection tubes:

Step 1: Place patient's arm in a downward position and clean venipuncture site with alcohol;
Step 2: Apply tourniquet;
Step 3: Remove the upper cover of needle and assemble the needle in holder; Perform venipuncture with arm downward and tube stopper upper-most;
Step 4-5: Push tube onto needle, puncturing stopper diaphragm;
Step 6: Release tourniquet as soon as blood appears in tube and remove tube from holder when first tube has filled to its stated volume and blood flow ceases;
Step 7: Turn the filled tube upside-down and return it to upright positions and repeat this inversion according to different additive performance;
Step 8: Place succeeding tubes in holder, puncturing diaphragm to begin follow, see Recommended Order of Draw;
Step 9: As soon as blood stops flowing in the last tube, remove tube from holder and remove needle from Vein, applying pressure to puncture site with dry sterile swab until bleeding stops;
Step 10: Dispose the needles into Sharps Disposal Containers according to related policies and guidelines.