Swipe or use the arrows to view product images.
Fixed Foam Bladder Tank for Fire Fighting
| Price | $3999.00 |
|---|---|
| Min Order | 1 Set |
| Availability | In Stock |
| Shipping From | Guangdong, China |
| Popularity | 387 people viewed |
Model NO.:
PHYM
Tank Capacity:
500-10000L (130~2650 Gallon)
Flow Range:
4-360L/S (63~1513gpm)
Proportioner Size:
Dn80~Dn250 (3"~10")
Working Pressure:
0.6MPa~1.2MPa
Mixing Ratio:
3% or 6%
Type:
Vertical & Horizontal
Trademark:
GAN
Transport Package:
Crate or Pallet
Origin:
Shenzhen, China
HS Code:
8424100000
Product Description
High Quality Fixed Foam Bladder Tank for Fire Fighting
The PHYM series Foam Bladder Tank is to provide foam solution for fire foam system. It is mainly consist of pressure tank, bladder, proportioner, control valves, pressure gauge and pipelines. High-pressure water is needed to swap out foam concentrate (stored in bladder in the tank) from the tank as a certain proportion. Foam concentrate then mix with pressurized water and form foam solution. For bladder is separated from the water that it can be utilized next time if not finished. Besides, there is feed inlet to refill or rechange foam concentrate.
Working Principle:
When pressurized water flow through the proportioner, a small part of water (3%~6%) flow into tank from water inlet and press bladder to swap out equal foam concentrate to mix with another part of water (97%~94%) in proportioner. Foam solution flows out from outlet and was supplied to foam generators or foam nozzles through pipelines.
Application:
The unit usually constitutes foam spray system and low/high expansion foam extinguishing system with pipelines, foam generators and foam nozzles. This unit provides foam solution for these systems through pipelines which are distributed in all destination areas and they are connected with generators or foam nozzles. The system works once there is fire somewhere and solution was transported to destination area through pipelines. Thus destination area gets foam solution to put out fire with foam generators or foam nozzles.
Characteristic:
1. Big flow pressure range and small pressure loss.
2. Widely used both in mid-multiples and low multiples foam extinguishing system.
3. Two types: horizontal and vertical.
Technical parameters:
| Working Pressure Range | 0.6~1.2MPa | |
| Pressure Drop | 0.2MPa | |
| Test Pressure | Intensity | 1.5MPa |
| Seal | 1.32MPa | |
| Tank Capacity | 500~10000L | |
| Size of Proportioner | DN80~DN250 | |
| Flow Rate | 4~360L/S | |
| Mixing Ratio | 3% or 6% | |
Notes: we make available customized design for our clients
Contact us:
Shenzhen Winan Industrial Development Co., Ltd.
No. 18, Fengshun Road, Tongle, Longgang District, Shenzhen City, Guangdong, China
Website: http://winanfire.en.made-in-china.com
- Similar Products
Negotiable
1000 Liters (MOQ)
6% Protein Foam Fire Extinguishing Agents
Jiangsu Suolong Fire Science and Technology Co., Ltd.
$10.00
100 Pieces (MOQ)
Heavy Duty Rim Type Panic Exit Device for Fire Door
Hefei Dortec Autodoor Technology Co., Ltd.
Negotiable
1000 Liters (MOQ)
6% Afff Foam Extinguishing Agent
Jiangsu Suolong Fire Science and Technology Co., Ltd.
Negotiable
1000 Liters (MOQ)
6% Fluoroprotein Fire Fighting Foam Concentrate
Jiangsu Suolong Fire Science and Technology Co., Ltd.
$10.00
100 Pieces (MOQ)
Ca Fire Brass or Ductile Iron Dn150 Fire Foam Hydrant
Ca Fire Protection Co., Ltd.