UL CE LAN Cable Network Cable CAT6 FTP

SHG lan cable network cable CAT6 FTP, 23AWG LAN cable ethernet network cable, ethernet cable 8p8c shielded, 305m/box, PVC/LSZH jacket, 550 MHz, network link Test pass 90m.
Certification: UL, ETL, CE, RoHS, REACH, ISO9001
Quality warranty.

         Network Link Test  Pass,  UL, ETL, CE, RoHS, ISO9001 approved !

Construction (CAT6 FTP (F/UTP))
Conductor: Solid bare copper / CCA                             Diameter: 0.57mm / 23AWG
Insulation: PE                                                                Average thickness ( +/-0.03mm): 0.24mm
Insulation Dia ( +/-0.03mm): 1.05mm                           Min point thickness: 0.22mm
Cross:
Jacket: PVC or LSZH                                                    Average thickness: 0.55
Outer Dia( +/-1.0mm) 6.5                                              Min point thickness: 0.53
Rip cord: YES

Core color:
Pair 1: Blue - white/blue                                           Pair 2: Orange - white/orange
Pair 3: Green - white/orange                                    Pair 4: Brown - white/brown


Application
 1000BASE-T Gigabit Ethernet                                                100MHz Broadband Video
 10BASE-T, 100BASE-T Fast Ethernet (IEEE 802.3)               Voice, T1, ISDN
 100 VG - AnyLAN(IEEE802.12), 155/622 Mbps ATM            Patch Cord

Standard Compliances
 All Category 5e Requirements as Per ANSI/TIA/EIA, ISO/IEC, and CENELEC EN Standards:
 ANSI/TIA/EIA 568-B.2                           2ND Edition ISO/IEC 11801 Class D
 CENELEC EN 50173-1                            IEC 61156-5, CENELEC EN 50288-2-1 Horizontal Cable
 Flame Retardancy is Verified According to IEC 60332-1

Electrical Performance (100MHz)
 1.0-100.0MHz Impendance(ohms) 100+/-15                                   1.0-100.0MHz Impendance delay screw(ns/100m) <45
 Pair to Ground Capacitance Unbalance (PF/100m) 330Max          Conductor DC resistance 20%(ohms/km) <72
 Resistance Unbalance(%): 5                                                            Spark Test 850 V AC
 Dielectric Strength 2500 V DC / 3 seconds                                      Insulation Resistance Test Min. 150 MΩ /Km
 Conductor Resistance Max. 9.38Ω /100m at 20                              Resistance Unbalance Max. 5%
 Capacitance Unbalance Max. 330 pF/100m                                    Mutual Capacitance Max. 5600 pF/100m

                     Network Link Test Reports (CAT6 0.51mm Copper)

Package
 305m or 152.5m pull box, other length in plastic reel or wooden reel available upon request.

Why choose us  -  advanced production line & management system.
 Our cable workshop corner:

  We, SHG produce the quality, we focus on quality in our over 20 years growing. 

Certificates
 CE, RoHS, UL, ETL, ISO9001

Characteristics
1.0-100.0MHz Impendance(ohms) 100+/-15                                1.0-550.0MHz Impendance delay screw(ns/100m) <45
Pair to Ground Capacitance Unbalance (PF/100m) 330Max        Mutual Capacitance Max. 5600 pF/100m
Conductor DC resistance 20%(ohms/km) <72                           Resistance Unbalance(%): 5                       
Spark Test 850 V AC                                                                     Dielectric Strength 2500 V DC / 3 seconds
Insulation Resistance Test Min. 150 MΩ /Km                               Capacitance Unbalance Max. 330 pF/100m

Test object: Jacket                                                 Test Material: PVC, PE, LSZH
Before Tensile strength(Mpa): >=13.8                   Aging Elongation ((%): >=100
Aging condition(C xhrs): 100x240                         After Tensile strength(Mpa): >=85% of unaged
Aging Elongation(%): >=50% of naged

Standard Compliance
All Category 6 Requirements as Per ANSI/TIA/EIA, ISO/IEC, and CENELEC EN Standards:
Comply with below characteristics