High Tensile Strength 6 24 Core Optical Fiber Cable Manufacture

Product Description
The loose tubes are made of high modulus plastics (PBT) and filled with a water resistant filling gel. Loose tubes are stranded around non-metallic central strength member (FRP). The cable core wrapped with a water blocking tape, and then aramid yarns or glass yarns are applied over the cable core. Polyethylene (PE) is extruded as outer sheath.


Feature
1, High quality optical fiber provides good transmission performance
2, Accurate fiber excess length control ensures excellent mechanical and temperature performance
3, Special filling gel filled loose tubes provide perfect optical fiber protection
4, All section water blocking provide reliable performance of moisture-proof and water block
5, High Young's modulus fiber reinforced plastic (FRP) as central strength member gives high tensile strength
6, All dielectric structure, light weight, easy installation, good electromagnetic resistance and suitable for operating in electrical system or frequently lighting areas
7, Strict craft and raw material control enable lifespan over 30 years
Performance

Applications: Suitable for long-distance communication and indoor communication
Way of laying: Aerial, Duct
Operating temperature: -40 ~ + 70 ° C
Bend radius: Static 10x cable diameter: Dynamic 20x cable diameter

Mechanical Performance:
Max Tension Performance: IEC 60794-1-2-E
Max. Operation Tension: IEC 60794-1-2-E1
Crush Test: IEC 6079 -1-2-E3
Impact Test: IEC 60794-1-2-E4
Repeated Bending: IEC 60794-1-2-E6
Torsion Test: IEC 60794-1-2-E7
Cable bend: IEC 60794-1-2-E11A
Attenuation Coefficient: ITU-T G. 652
Structural Test: IEC-60793-1-20
Environmental Performance
Temperature Cycling: IEC 60794-1-2-F1
Water Penetration: IEC 60794-1-2-F5B
Filing Compound Flow: IEC 60794-1-E14

Structure and Technical Specifications