Menu
Global B2B sourcing platform
Verified suppliers and manufacturers

High Voltage Electric Diesel Generating Set 800kVA to 4000kVA Powered by Cummins Mtu Perkins Baudouin Engine Generator Set Genset Factory

Price $200000.00
Min Order 1 Piece
Availability In Stock
Shipping From Jiangsu, China
Popularity 362 people viewed
Model NO.:
BAIFA HV GENSET
Warranty:
1 Year or 1000 Hours
Type:
Basic Diesel Generator
Installation Method:
Fixed
Stroke:
Four Stroke
Cooling Method:
Water Cooling
Output Type:
AC Three Phase
Speed:
Speed
Conditions of Use:
Land Use
Usage:
Common Units
Landuse Type of Unit:
Ordinary
Excitation Mode:
AC Rotating Exciter
Structure:
Open Type
Engine:
Mtu Cummins Mtu Perkins Baudouin
Alternator:
Stamford Mecc Alte Leroy-Somer
Control System:
Comap
Power Range:
800 - 4000 kVA
Voltage:
33kv; 4.16kv; 6.3kv; 6.6kv; 6.9kv;13.8kv
Frequency:
50Hz 60Hz
Options:
ATS, Circuit Breaker, Parallel, Remote Control Pan
Certificates:
ISO/Ce/SGS, etc
Trademark:
Baifa
Transport Package:
Plastic Wrapping or Wooden Case
Specification:
ISO8528, GB/T2820-1997
Origin:
China
HS Code:
85021310
Product Description
Baifa, located in Wuxi, near Shanghai, which is the flourishing area of the world manufacturing, owns one of the largest manufacturing bases of diesel generator sets, marine diesel generator sets, green energy fuel generator sets and lighting towers in Asia, even in globe, covering an area of 60,000 sq.m, and with a 34,000 sq.m. assembly workshop. Baifa has long-term cooperation with world leading companies such as VOLVO PENTA, CUMMINS, MTU, SME MITSUBISHI, SCANIA, BAUDOUIN, STAMFORD and etc. With a range from 8KW to 3000KW, Baifa products cover types of general and special field. 'One stop' comprehensive solutions for power generation.
 

Basic configuration

Engine brand: CUMMINS, MTU, PERKINS, MITSUBISHI, SME, BAUDOUIN
HV Alternator brand: STAMFORD, LEROY-SOMER


Options

Simple Operation:

-A switch cabinet, when calculating the current, it needs to estimate 20% more current. protection relay is standard configuration.

-Switching power supply (small inverter) for 1-2 gensets, installed in each switch cabinet.

 

Parallel Operation:

-Conventional parallel system

one generator unit, one parallel system and one switch cabinet. When calculating the current, it needs to estimate 20% more current.

-DC panel is required for all switch cabinets to provide DC power for action

-One DC panel for 10 switches

-parallel operation requires 1 * PT Panel to detect the busbar voltage of parallel operation

-Generator grouding panel to achieve leakage protection. Including: isolating switch vacuum contactor, current transformer, resistor. (standby use genset is optional and prime use genset is standard)

 

Grid Connection:

-Mains paralleling control cabinet.

 

Coupling:

-flexible coupling

-MTU high-voltage genset needs to be equipped with a coupling. If not installed, the bearing current will easily break through the oil film (only resistant to 60mV, Cummins 200-300mv.)

 

Differential Protection:

-similar leakage and earth protection

 

Container:

-price inquiry of HV switchgear

-selection of electric louver

-selection of Magnetic float level gauge

 

Radiator:

-it is recommended to drive radiator by belt, and motor drive requires external power supply (main power grid) or power transmission to main power grid after genset startup.

 

Engine Heater:

-mains heater, shut down for use. Or use Diesel Engine Heater(fuel boiler type)













  • Similar Products
Full Page Contact Supplier