Swipe or use the arrows to view product images.
Highspeed Injection Molding Machine Hxh260 Ton Produce 64 Cavities Spoon
| Price | $51084.00 |
|---|---|
| Min Order | 1 Set |
| Availability | In Stock |
| Shipping From | Zhejiang, China |
| Popularity | 506 people viewed |
Model NO.:
HXH260
After-sales Service:
24 Hours Service Online
Warranty:
24 Months
Type:
Plastic Injection Molding
Structure:
Horizontal
Plastic Type:
Thermoplastic
Plasticizing Way:
Screw Type
Clamping Way:
Hydraulic & Mechanical
Automation:
Automatic
Computerized:
Computerized
Certification:
CE, ISO9001:2008
Energy Saving:
Servo Energy Saving
After Sales Service:
Engineers Avaiable to Service Machine
Voltage:
According to Countries
Showroom Locate:
Malaysia, Russia, Turkey, Uzberkistan
Condition:
New
Machine Weight:
10ton
Injection Weight (PS):
464 G
Space Between Tie-Bar:
610X560 mm
Trademark:
HIGHSUN
Transport Package:
Standard Packing
Specification:
6.49X1.8X2.11M
Origin:
China
HS Code:
8477101090
Product Description
HXH260 injection molding machine
Specification of HXH260
HIGHSUN thin-wall high speed IMM series is based on years of experiment and researching,specifically for the molding cycle is short,high speed injection molding requirement products,Outstanding performance in the aspects of motion characteristics,machine precision,sevice life and so on.Widely used in packaging,medical and 3C electronic products.
The detial of Highspeed machine
1.With CANbus EtherCAT bus communication,the compuer sustem is full digital controlled.
2.The temmperature contral adopts special control module,The accuracy can achieve 1 degree.
3.With the power monitoring function,it can monitor the current energy consumption during the production.
4.The special single cylinder strcture drastically reduces the return-oil amount during the high speed injection.At the same time,it reduces the return-oil pressure,In this way,it increases machine injectuib acceleration.
5.In using the graphite steel sets as well as thin oil lubrication,the bent elbow connecting rods and guide bars have better bearing resistance and abrasive resistance,The machine has a longer service life.
6.Controlled by the proportional direction valve,The movement can accelerate quickly.During the high speed running,it can operate steadity and precisely control the mold open position.
7.The hydraulic system adopts double servo drive control.It has the advantages of high effciency,energy saving and low noise.Meanwhile,it can realize mold-open and charge sunchronization function.
HIGHSUN factory:
Workshop 1: SP(Middle-speed injection molding machine) and HXYD(Fully-electric and high-speed injection molding machine) production R & D workshop, also stored in the injection molding machine production required parts.
Company Introduction
China top 1 plastic injecion molding machine
a. Honored with "Top 3" manufacturer of comprehensive strength by NBPMA over the past decade.
b. Established in 1973. Concentrate on Injection Molding field more than 50 years.
c. It covers an area of 1.2 million square feet.
d. Sold to more than 40 countries around the world.
e. Annual output more than 7000sets,ensuring faster delivery time.
f. Worldwide sales reached 130 million US dollars, exports maintain steady growth.
Specification of HXH260
| MODEL: HXH260 | ||||
| TECHNICAL PARAMETER TABLE | A | B | ||
| INJECTION UNIT | SCREW DIAMETER | mm | 50 | 55 |
| SCREW L/D RATIO | L/D | 24 | 22 | |
| INJECTION CAPACITY IN THEORY | cm3 | 422 | 510 | |
| INJECTION WEIGHT(PS) | g | 384 | 464 | |
| INJECTION PRESSURE | MPa | 161 | 133 | |
| INJECTION VELOCITY | mm/s | 320 | ||
| PLASTICIZING CAPACITY | g/s | 57 | 80 | |
| SCREW SPEED | rpm | 400 | ||
| CLAMPING UNIT | CLAMPING FORCE | KN | 2600 | |
| MOVING MOULD-PLATE STROKE | mm | 530 | ||
| MAX. MOULD HEIGHT | mm | 600 | ||
| MIN. MOULD HEIGHT | mm | 230 | ||
| SPACE BWTWEEN TIE-BARS (W*H) | mm | 610*560 | ||
| HYDRAULIC EJECTOR FORCE | KN | 80 | ||
| HYDRAULIC EJECTOR STROKE | mm | 150 | ||
| EJECTOR NUMBER | n | 13 | ||
| OTHERS | PUMP PRESSURE | MPa | 17.5 | |
| MOTOR/DRIVING POWER | KW | 30+30 | ||
| HEATING CAPACITY | KW | 17.8 | ||
| MACHINE DIMENSION (L*W*H) | m | 6.49*1.80*2.11 | ||
| MACHINE WEIGHT | t | 10 | ||
| OIL TANK CAPACITY | L | 560 | ||
HIGHSUN thin-wall high speed IMM series is based on years of experiment and researching,specifically for the molding cycle is short,high speed injection molding requirement products,Outstanding performance in the aspects of motion characteristics,machine precision,sevice life and so on.Widely used in packaging,medical and 3C electronic products.
The detial of Highspeed machine
1.With CANbus EtherCAT bus communication,the compuer sustem is full digital controlled.
2.The temmperature contral adopts special control module,The accuracy can achieve 1 degree.
3.With the power monitoring function,it can monitor the current energy consumption during the production.
4.The special single cylinder strcture drastically reduces the return-oil amount during the high speed injection.At the same time,it reduces the return-oil pressure,In this way,it increases machine injectuib acceleration.
5.In using the graphite steel sets as well as thin oil lubrication,the bent elbow connecting rods and guide bars have better bearing resistance and abrasive resistance,The machine has a longer service life.
6.Controlled by the proportional direction valve,The movement can accelerate quickly.During the high speed running,it can operate steadity and precisely control the mold open position.
7.The hydraulic system adopts double servo drive control.It has the advantages of high effciency,energy saving and low noise.Meanwhile,it can realize mold-open and charge sunchronization function.
HIGHSUN factory:
Workshop 1: SP(Middle-speed injection molding machine) and HXYD(Fully-electric and high-speed injection molding machine) production R & D workshop, also stored in the injection molding machine production required parts.
Workshop 2: HXM(Servo energy injection molding machine) and HXH(High-speed injection molding machine) production R & D workshop. Storage of manufactured machine, such as HXM 128tons, 158tons, 418tons, 478tons, HXH 260tons, 280tons, 430tons and so on.
Workshop 3: HXM(Servo energy injection molding machine), PVC injection molding machine, PET injection molding machine, HXS(Clear two-color injection molding machine) and HXH(High-speed injection molding machine) production R & D workshop. Storage of manufactured machine, such as HXM 98tons, 268tons, from 538tons to 2500tons, HXH 160tons, 200tons, 350tons, 380tons, HXS160tons, 200tons and so on.
Workshop 4: Stored in screw barrel, hopper, hydraulic motor, thermocouple, valve, sheet metal injection molding machine accessories.
Workshop 5 and 6 : HIGHSUN's independent R & D workshop, automatic processing center. According to customer feedback to the performance of the machine constantly improve, to provide customers with better injection molding machines.
Company Introduction
China top 1 plastic injecion molding machine
a. Honored with "Top 3" manufacturer of comprehensive strength by NBPMA over the past decade.
b. Established in 1973. Concentrate on Injection Molding field more than 50 years.
c. It covers an area of 1.2 million square feet.
d. Sold to more than 40 countries around the world.
e. Annual output more than 7000sets,ensuring faster delivery time.
f. Worldwide sales reached 130 million US dollars, exports maintain steady growth.
- Similar Products
$13500.00
1 Piece (MOQ)
Small Injection Molding Machine for Plastic
Dongguan Xihua Machinery Technology Co., Ltd.
$32000.00
1 set (MOQ)
Injection Molding Machine for Vacuum Blood Collection
Ningbo Union Power Machinery Co., Ltd.