Swipe or use the arrows to view product images.
Hot-Pressed Sintering Boron Carbide B4c Nozzles for Sandblasting
| Price | $100.00 |
|---|---|
| Min Order | 10 Pieces |
| Availability | In Stock |
| Shipping From | Henan, China |
| Popularity | 495 people viewed |
Model NO.:
B4C Nozzle
Type:
Nozzle
Feature:
High Pressure
Certification:
ISO
Condition:
New
Nozzle Material:
Boron Carbide B4c
Jacket:
Aluminium, Polyurethane Protector
Sintering:
Hot-Pressed
More Specifications:
Customizable
Method Type:
Automatic, Manual
Trademark:
kumthai
Transport Package:
Each in a Plastic Case, Total in a Carton Box.
Specification:
5.0MM, 6.5MM, 8.0MM, 9.5MM, 11.0MM, 12.0MM, etc.
Origin:
Zhengzhou, China
HS Code:
8424909000
Product Description
Hot-Pressed Sintering Boron Carbide Nozzles for Sandblasting, More Specifications Customizable according to Customers' Drawings
Material: Boron Carbide (B4C).
Jacket: Aluminum / Polyurethane Protector.
The hardness of boron carbide is only secondary to diamond and CBN. The density of the boron carbide products produced by us is close to its academic density 2.52g/cm3. The advantages are: longer service life, high hardness, high wear-resistance ability, anti-corrosion, lower cost per use, reducing down time. It's the ideal material for sandblasting nozzle and mechanical seal.
The gas dynamics of venturi nozzle is better than straight-hole nozzle, the vortex is improved or ceased to exist, greatly reduced the pressure loss in the same pressure conditions. Abrasive exports increased to more than double the speed, efficiency than the straight-hole nozzle to increase 15% -40%, 20% lower abrasive consumption.
Boron carbide can be used to manufacture gun nozzles in the arms industry, which is extremely hard and wear-resistant, no reaction with acid-base, high/low temperature resistance, high pressure resistance, crystal system: hexagonal, density: 2.52g/cm3, Mohs hardness: 9.36, microhardness 5400-6300kg/mm2, bending strength ≥400Mpa, melting point: 2450ºC. Because it has the characteristics of wear resistance and high hardness, Boron Carbide Sandblasting Nozzle will gradually replace the known carbide/tungsten steel and silicon carbide, silicon nitride, alumina, zirconia and other materials sandblasting nozzle in the future.
Note: Special requirement on specifications can be satisfied through discussion.
Kumthai's boron carbide nozzles can be customized according to customers' requirements. Please tell us the specifications or send us the drawings, we will make a quotation according to your drawings and send the prices for your reference.
Material: Boron Carbide (B4C).
Jacket: Aluminum / Polyurethane Protector.
The hardness of boron carbide is only secondary to diamond and CBN. The density of the boron carbide products produced by us is close to its academic density 2.52g/cm3. The advantages are: longer service life, high hardness, high wear-resistance ability, anti-corrosion, lower cost per use, reducing down time. It's the ideal material for sandblasting nozzle and mechanical seal.
The gas dynamics of venturi nozzle is better than straight-hole nozzle, the vortex is improved or ceased to exist, greatly reduced the pressure loss in the same pressure conditions. Abrasive exports increased to more than double the speed, efficiency than the straight-hole nozzle to increase 15% -40%, 20% lower abrasive consumption.
Boron carbide can be used to manufacture gun nozzles in the arms industry, which is extremely hard and wear-resistant, no reaction with acid-base, high/low temperature resistance, high pressure resistance, crystal system: hexagonal, density: 2.52g/cm3, Mohs hardness: 9.36, microhardness 5400-6300kg/mm2, bending strength ≥400Mpa, melting point: 2450ºC. Because it has the characteristics of wear resistance and high hardness, Boron Carbide Sandblasting Nozzle will gradually replace the known carbide/tungsten steel and silicon carbide, silicon nitride, alumina, zirconia and other materials sandblasting nozzle in the future.
| Service Life | |||
| Nozzle Material | Service life(h, by time) | ||
| Steel grit/shot | Silica sand | Brown aluminium oxide | |
| Alumina | 20-40 | 10-30 | 1-4 |
| Tungsten Carbide | 500-800 | 300-400 | 20-40 |
| Silicon Carbide | 600-1000 | 400-600 | 50-100 |
| Boron Carbide | 2000-2500 | 1000-1500 | 500-1000 |
| Specifications | |||||
| Item | Specifications (mm) | ||||
| I. D Φd | Exit size | Length L | Thread size | ||
| BN1902-5.0 | 5.0 | 9.0 | 130 | 2''-4-1/2 (UNC) | |
| BN1902-6.5 | 6.5 | 10.5 | 135 | ||
| BN1902-8.0 | 8.0 | 12.0 | 140 | ||
| BN1902-9.5 | 9.5 | 14.0 | 165 | ||
| Specifications | |||||
| Item | Specifications (mm) | ||||
| I. D Φd | Exit size | Length L | Thread size | ||
| BN1901-6.5 | 6.5 | 10.5 | 135 | 2''-4-1/2 (UNC) | |
| BN1901-8.0 | 8.0 | 12.0 | 150 | ||
| BN1901-9.5 | 9.5 | 14.0 | 165 | ||
| BN1901-11.0 | 11.0 | 15.5 | 190 | ||
| BN1901-12.5 | 12.5 | 17.0 | 215 | ||
Kumthai's boron carbide nozzles can be customized according to customers' requirements. Please tell us the specifications or send us the drawings, we will make a quotation according to your drawings and send the prices for your reference.
- Similar Products
$12.00
100 Pieces (MOQ)
3000psi High Pressure Car Wash Foam Spray Gun
Ningbo Jiajian Machinery Co., Ltd.
$1.50
1000 Pieces (MOQ)
Sand Filter Plastic Nozzle for Cooling Tower
CY Spraying & Purification Technology Limited