Swipe or use the arrows to view product images.
Hot Sale Medical Blood Oxygen Monitor Finger Pulse Oximeter
| Price | $7.88 |
|---|---|
| Min Order | 2 Pieces |
| Availability | In Stock |
| Shipping From | Guangdong, China |
| Popularity | 269 people viewed |
Model NO.:
YAD-002
Classification:
Imaging Diagnostic Equipment
Type:
Pulse Oximeter
Certification:
CE, FDA, ISO13485
Display:
Digital Tube Display
Po2: Measuring Range:
70% - 99%
Power Consumption:
Below 30mA
Operating Temperature:
5 ºC - 40 ºC
Atmospheric Pressure:
70kpa ~ 106kpa
Unit Net Weight:
28.4G
Unit Gross Weight:
44G
Pr: Measuring Range:
30bpm - 240bpm
Humidity:
15% - 80%
Transportation and Storage Environment:
Temperature: -10 ºC - 55 ºC
Product Accessories:
User Manual * 1 Hanging Rope * 1 Quality Control C
Trademark:
Topmedi
Transport Package:
420PCS/Big Box, 84*57*36 mm
Specification:
60*33.5*49CM
Origin:
China
Product Description
Hot Sale Medical Blood Oxygen Monitor Finger Pulse Oximeter
1. Digital tube display.
2. SpO2: Measuring range: 70% ~ 99%
Accuracy: ± 2% in the range of 80% ~ 99%;
± 3% in the range of 70% ~ 79%;
No other range defined
3.PR: Measuring range: 30BPM ~ 240BPM
Accuracy: ± 1BPM or ± 1%
4. Power supply: two AAA 1.5V alkaline batteries
5. Power consumption: below 30mA
6. Product size :: 58 * 32 * 31mm
7. Automatic shutdown: the product automatically shuts down without putting your finger for more than 8 seconds.
8. Operating environment:
Temperature: 5 ºC ~ 40 ºC
Humidity: 15% ~ 80%
Atmospheric pressure: 70kPa ~ 106kPa
9.Transportation and storage environment:
Temperature: -10 ºC ~ 55 ºC
Humidity: 95%
Atmospheric pressure: 50kPa ~ 106kPa, non-corrosive
Well ventilated environment
Instructions for Use:
1. Install a pair of AAA batteries into the battery box.
2. Insert your finger into the rubber hole of the oximeter.
3. Put your finger into the test position of the oximeter, and lightly press the button on the panel of the oximeter to automatically test the results
within about 8 seconds.
4. When the oximeter is working, do not shake your fingers or move your body.
5. Press the touch button on the panel to adjust the direction of the display interface according to usage habits.
6. If there is no finger inserted, the device will automatically shut down within 8 seconds.
Hanging Rope Installation
1. Pass the thin end of the rope through the hole.
2. Thread the end of the thicker rope through the thinner rope and tighten.
Product acessories:
User Manual * 1
Hanging rope * 1
Quality Control Card * 1
1. Continuous operation for 20 hours with low power consumption.
2. Low battery indicator.
3. Low-voltage indicator light automatically shuts down in 8s when signal is out.
4. Small and light, easy to carry Key function description: In standby mode, press the key to start
the working state, press this button lightly to change the display mode under working status.
1. Digital tube display.
2. SpO2: Measuring range: 70% ~ 99%
Accuracy: ± 2% in the range of 80% ~ 99%;
± 3% in the range of 70% ~ 79%;
No other range defined
3.PR: Measuring range: 30BPM ~ 240BPM
Accuracy: ± 1BPM or ± 1%
4. Power supply: two AAA 1.5V alkaline batteries
5. Power consumption: below 30mA
6. Product size :: 58 * 32 * 31mm
7. Automatic shutdown: the product automatically shuts down without putting your finger for more than 8 seconds.
8. Operating environment:
Temperature: 5 ºC ~ 40 ºC
Humidity: 15% ~ 80%
Atmospheric pressure: 70kPa ~ 106kPa
9.Transportation and storage environment:
Temperature: -10 ºC ~ 55 ºC
Humidity: 95%
Atmospheric pressure: 50kPa ~ 106kPa, non-corrosive
Well ventilated environment
Instructions for Use:
1. Install a pair of AAA batteries into the battery box.
2. Insert your finger into the rubber hole of the oximeter.
3. Put your finger into the test position of the oximeter, and lightly press the button on the panel of the oximeter to automatically test the results
within about 8 seconds.
4. When the oximeter is working, do not shake your fingers or move your body.
5. Press the touch button on the panel to adjust the direction of the display interface according to usage habits.
6. If there is no finger inserted, the device will automatically shut down within 8 seconds.
Hanging Rope Installation
1. Pass the thin end of the rope through the hole.
2. Thread the end of the thicker rope through the thinner rope and tighten.
Product acessories:
User Manual * 1
Hanging rope * 1
Quality Control Card * 1
- Similar Products
$135.30
48 Pieces (MOQ)
Medical Diagnostic Set Otoscope Ophthalmoscope (MT01012201)
Medtrue Enterprise Co., Ltd.
$2500.00
1 Piece (MOQ)
Hot Selling Manual Phorpter China Optomoetry Phoroptor
Rock Import and Export Company
$800.00
1 Piece (MOQ)
Heavy-Duty Surgical Suction Machine Vacuum Suction
Perlong Medical Equipment Co., Ltd.
$0.30
1 Piece (MOQ)
Lung Portable Pocket Peak Flow Meter
Ningbo Finer Medical Instruments Co., Limited
$32.00
1 Piece (MOQ)
Compatible Mortara Eli 230 EKG Cable ECG Cable
Shenzhen F1 Technology Co., Ltd.
$8999.00
1 Piece (MOQ)
Bladder Scanner Medical Ultrasonic Diagnostic Equipment
Xuzhou Zhongjun Imp. &Exp. Co., Ltd