Menu
Global B2B sourcing platform
Verified suppliers and manufacturers

Hot Selling Series Ht-5 Plastic Waterproof 120*160*95mm ABS Surface Flush Type 5 Way Outdoor MCB Distribution Box Electrical Power Box

Price $6.90
Min Order 500 Pieces
Availability In Stock
Shipping From Zhejiang, China
Popularity 495 people viewed
Model NO.:
HA HT HPC AT A
Type:
Distribution Metering Box
Structure:
Protection
Certification:
ISO9001:2000, CCC, CE/Ccci
Form:
Partly-welded Type
Operation Voltage:
Low Voltage
Size:
1/2 Uint
Application Range:
High-rise Buildings
Shell Protection Grade:
IP65
Brand:
Guozhen
Country:
China
Type of Shipping:
Shipping/Air/FedEx
Manufacturer Type:
Manufacturer/Factory
Trademark:
GUOZHEN
Transport Package:
Imported Carton/Carton
Specification:
140*210*100
Origin:
Zhejiang Wenzhou
HS Code:
85381090
Product Description
Product description:

Plastic distribution box has the following characteristics: waterproof, dustproof, acid-resistant, alkali-resistant, impact-resistant, explosion-proof, anti-ultraviolet radiation, insulation non-conductive and other excellent characteristics, and is widely used in outdoor terminals, ports, field power distribution engineering, communications, mechanical equipment, chemical, petroleum and other bad environments.

Installation precautions:

1.The elevation or perpendicularity of the distribution box exceeds the allowable deviation, which is caused by inaccurate measurement and positioning or uneven ground, and should be corrected in time.

2.The iron frame is not square. If the iron frame is not straightened and aligned before installation, or the fixed point position is offset during installation, the suspension wire shall be used for re-alignment before fixing.

3.The panel electric tools and instruments are not firm, flat or uneven, the indenter is not firm, the indenter damages the wire core, and the multi-strand wire indenter is not equipped with crimping terminals. No card frame is installed under the brake. If the screws are not tight, they should be tightened, and the spacing should be high speed and uniform as required, and leveled. The damaged part of the wire core shall be cut off and reconnected, the multi-stranded wire shall be installed with crimping terminals, and the card frame shall be supplemented.







  • Similar Products
Full Page Contact Supplier