Menu
Suppliers Products
Global B2B sourcing platform
Verified suppliers and manufacturers
MadeInChina.com > Products > Electrical & Electronics > Sensor > Pressure Sensor
Swipe or use the arrows to view product images.

Htsensor Mini silicon 13mm Diameter Custom Pressure Sensor transducer

Price $23.00
Min Order 5 Pieces
Availability In Stock
Shipping From Shaanxi, China
Popularity 323 people viewed
Send Inquiry View Full Page
Model NO.:
HT13
Type:
Piezoresistive Pressure Sensor
Component:
SemiConductor Type
For:
Diffused Silicon Pressure Transmitter
Output Signal Type:
Analog Type
Production Process:
Integration
Material:
Stainless Steel
Thread Type:
No
Wiring Type:
Four-Wire
Measuring Medium:
Gas and Liquid
IP Rating:
IP65
Certification:
RoHS
Customized:
Customized
Keywords:
Mini Sensor
range:
35kpa~10Mpa
output:
mv signal
supply:
1.5mA /5VDC /10VDC
Trademark:
HengTong
Transport Package:
Carton
Specification:
13mm
Origin:
China
HS Code:
9026209090
Product Description
HT Hengtong Mini exquisite 13mm diameter custom pressure sensor
HT13 Silicon Piezoresistive Pressure Sensor
Product Description

Introduction: 

HT13 is a silicon piezoresistive pressure sensor with a core of highly stable  diffused silicon element. It utilizes the piezoresistive effect of diffused silicon to measure the pressure of liquids and gases. This sensor is widely used in applications such as air compressors and refrigeration systems .
Product  Features:
  1. Utilizes advanced technology and is encapsulated in a 316L stainless steel housing
  2. Wide measuring range 0~350KPa~60MpaS
  3. High reliability and excellent stability 
  4. Various threaded interfaces available for selection
Applications:
  1. Suitable for measuring non-corrosive gas and liquid pressure with 316L stainless steel compatibility
  2. Compact design, ideal for applications with limited space 
  3. Used in process control systems for monitoring and controlling pressure   
  4. Commonly used in refrigeration systems and air compressors for pressure measurement
Electrical performance:
  1. Power Supply: ≤2mA DC (Typical 1.5mA DC)
  2. Input Impedance:3KΩ~6KΩ
  3. Output Impedance:2.5KΩ~6KΩ
  4. Electrical Connection:Gold-plated Kovar pins or 100mm high-temperature wires
 
Performance Parameters:
Measurement RangeGauge(G)350KPa,1000KPa,2000Kpa
Absolute(A)350KPaA,700KPaA,1000KPaA,2000KPaA
Sealed(S)3500KPaS,7MPaS,10MPaS,20MPaS,40MPaS,60MPa
 TypMaxUnit
Linearity  ±0.15±0.3%F.S
Repeatability 0.050.1%F.S
Hysteresis   0.050.1%F.S
Zero Offset Output  0±10±2mV
Full Scale Output  100±10100±30mV
Zero Offset Temp. Drift  ±0.5±1%F.S
Full Scale Temp. Drift±0.5±1%F.S
Compensated Temp.0~70ºC
Operating Temperature  -20~80ºC
Storage Temperature -40~125ºC
Allowable OverloadTake the smaller value between 3 times the full scale or 80MPa 
Burst Pressure5X the full scale 
Long-term Stability0.2 %  F.S/Year
Diaphragm Material316L 
Insulation Resistance≥200MΩ 100VDC 
VibrationNo change under conditions of 10gRMS, 20Hz to 2000Hz 
Shock100g,11ms 
Response Time≤1ms 
O-ring SealNitrile rubber or Fluoro rubber 
Filling MediumSilicon Oil 
Weightabout 15g  
The parameters are tested under the following conditions:   1.5mA @ 25°C
 
 
Outline Construction
type1
type2
 
 
Electrical connection and compensation



 

 
Selection Examples

 
Ordering tips
1. Pay attention to the fit between the core size and the transmitter housing during assembly to achieve the       
required air tightness
2. During the assembly of the housing, ensure it is aligned vertically and apply even pressure to avoid jamming or damaging the compensation plate.
3. If the measured medium is not compatible with the core diaphragm and the housing material (316L), special instructions should be provided when placing the order.
4. Avoid pressing the sensor diaphragm with hands or sharp objects to prevent damage to the core due to diaphragm deformation or piercing.
5. Keep the pressure port of the gauge pressure core open to the atmosphere and prevent the entry of water, water vapor, or corrosive media into the core negative pressure chamber.
6. If there are any changes to the pin leads, follow the label on the actual core for reference.
 
company
 
 
Q&A
 
1.Q: What are the features of your pressure sensor transmitters?
  A: High precision, durability, and excellent performance. Customization available.
 
2.Q: Can I customize special specifications?
  A: Yes, our engineers can tailor products to meet specific needs. We provide OEM and ODM service
 
3.Q: What is your production capacity?
   A: Our manufacturing facilities can produce up to 30,000 pressure sensor transmitters per month, so we are fully capable of meeting the needs of large-scale orders. However, it is advisable to contact our sales team in advance to ensure smooth production and delivery scheduling
.
4.Q: What's the typical delivery period?
   A: 5~8 working day for standard models. Customized products may vary.
 
5.Q: How are the products priced? Any discounts?
   A: Competitive pricing with discounts for bulk orders or long-term partners
.
6.Q: What is the warranty of your products? And after-sales service?
   A: Our warranty time is 24 months after shipment, and our after-sales will respond with your questions in 24hrs, remote  instruction by PC network is always available.
 
 
 
 
 
 
  • Similar Products
Full Page Contact Supplier
↑