$500.00
2 Pieces (MOQ)
Long Lasting Water Treatment Equipment Membrane
Proshare Innovation Suzhou Co., Ltd.
Swipe or use the arrows to view product images.
Hydranautics Hydracap Max 80-a UF Membrane Analogue
| Price | $2411.14 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Hubei, China |
| Popularity | 347 people viewed |
Model NO.:
TFMAXP105
Membrane Type:
Hollow
Type:
UF
Membrane Material:
PVDF (Polyvinylidene Fluoride), Tips
Pore Size:
0.08 Um
Fiber ID/Od:
0.6 mm/1.2 mm
Flow Direction:
Outside-in
Membrane Area:
105 M2
Diameter:
250 mm
Length:
2340.6 mm
Connection:
DN 50 Coupling
Analogue:
Hydranautics Hydracap Max 80-a
Trademark:
Tanal
Transport Package:
Paper Carton
Specification:
240*43*35 cm
Origin:
China
HS Code:
8421999090
Product Description
General Information
TFMAXP105 is manufactured as the direct analogue to Hydranautics HYDRAcap MAX 80-A (MAX80A) UF membrane module.
Hydranautics HYDRAcap MAX 80-A analogue ultrafiltration (UF) membrane module TFMAXP105 s a pressurized module, which is designed and manufactured for the filtration of surface water, potable water, seawater and industrial wastewater. These UF modules are made of new generation TIPS (thermally induced phase separation) PVDF hollow fiber membrane with high tensile strength and fouling resistance.
Hydranautics HYDRAcap MAX 80-A analogue ultrafiltration (UF) membrane module TFMAXP105 s a pressurized module, which is designed and manufactured for the filtration of surface water, potable water, seawater and industrial wastewater. These UF modules are made of new generation TIPS (thermally induced phase separation) PVDF hollow fiber membrane with high tensile strength and fouling resistance.
TFMAXP105 UF modules are applied in flexible UF systems, providing high-quality filtrate by removing suspended solids, colloids, pyrogens, bacteria, viruses and other impurities to protect downstream processes such as NF and RO.
Features
- Outside-to-inside flow direction
- New generation TIPS PVDF hollow fiber
- Uniform pore size of 0.08 μm
- Typical filtrate turbidity ≤ 0.1 NTU
- Bacteria removal ≥ 4 log
Advantages
- Extra high tensile strength for longer service life
- High tolerance for feed water
- High-quality filtrate
- Less energy needed for high flux
- Longer service life by high fouling resistance
- Economical analogues as direct replacement of Hydranautics HYDRAcap MAX 80-A
Applications
- Surface water
- Potable water
- Beverage clarification
- Industrial process water
- Reclaimed water reuse
- Industrial wastewater
- Pre-treatment of seawater desalination
Module Dimensions
| Model | L (mm/in) | L1 (mm/in) | L2 (mm/in) | D (mm/in) | D1 (mm/in) | W (mm/in) | Connection port | Air inlet |
| TFMAXP105 | 2340.6/92.15 | 2232.7/87.9 | 2110.9/83.11 | 250/9.84 | 290/11.42 | 172/6.8 | DN50 | 3/8" FNPT |
Specifications
| Specifications | Parameters |
| Model | TFMAX105 |
| Effective membrane area (m²/ft²) | 105/1130 |
| Filtrate flow rate m3/h (gpm) | 3.6 - 12.6 (15.7 - 55.5) |
| Dry weight (KG/lbs) | 62/135 |
| Wet weight filled with water (KG/lbs) | 118/260 |
| Membrane material | PVDF (Polyvinylidene Fluoride), (TIPS) |
| Fiber ID/OD | 0.6/1.2 mm (0.024/0.047 inch) |
| Flow direction | Outside-in |
| Pore size | 0.08 μm |
| Housing material | UPVC |
| Potting material | Epoxy resin |
Operating and Cleaning Limits
| Type of operation | Dead-end flow or cross flow |
| Typical flux (25°C) | 34 - 120 L/m2·h (20 - 71 gfd) |
| Temperature | 1 - 40°C (34 - 104°F) |
| Maximum feed pressure (20°C) | 5 bar (73 psi) |
| Maximum feed pressure (40°C) | 3 bar (44 psi) |
| Maximum trans-membrane pressure | 2 bar (30 psi) |
| Maximum air scour feed pressure | 2.5 bar (36 psi) |
| Air scour flow | 12.3 - 15.4 Nm3/h (7.3 - 9.1 acfm) |
| Air scour duration | 2 - 4 minutes |
| Air scour frequency | Once every 20 - 60 minutes |
| pH-Continuous operation @25°C | 2 - 11 |
| pH-Cleaning @25°C | 1 - 13 |
| Maintenance cleaning frequency | 1 - 3 times per day |
| Maintenance clean duration | 20 - 30 minutes |
| Disinfection chemicals | NaClO, ClO2 or NH2Cl |
| Cleaning chemicals | NaOH, HCl, H2SO4 or citric acid |
| Instantaneous chlorine tolerance | 5,000 ppm |
| Maximum chlorine exposure | 750,000 ppm-hrs |
| Maximum feed TSS | 100 ppm |
| Maximum feed turbidity | 300 NTU |
| Maximum feed particle size | 300 µm |
| Filtrate SDI15 | ≤ 2.5 |
| Filtrate turbidity | ≤ 0.1 NTU |
ISO 9001:2015 Quality Management Systems Certificate
TÜV Audit Certificate
Export License
Certificate of Origin
1. Customer-centric company culture
2. Efficient and flexible organizational system
3. 20+ years experience in membrane research, development and manufacturing
4. Better cost-effectiveness
1. Warranty granted.
2. Remote technical training, guidance and support.
3. On-site technical support for training, installation, commissioning, operation and trouble shooting.
4. Free replacement in warranty period.
Feedback Handling Process as below:
Picking up the phone and having the plant manager yelling at you about undelivered membranes and filters?
Your customers are complaining to you about the high costs of existing membranes and filters?
Feel frustrated in prices when you are bidding?
Send your inquiry to us and get a quote for your project now!
- Similar Products
$1000.00
100 Pieces (MOQ)
Stuf-2880135/220
Quanzhou Source Membrane Science & Technology Development Co., Ltd
$320.00
1 Piece (MOQ)
Spiral UF Membrane, 4040, Mwco1000 Dalton
RisingSun Membrane Technology (Beijing) Co., Ltd.
$885.20
1 Piece (MOQ)
Hyflux Kristal K600eri-55 K600eri55 UF Membrane Equivalent
Wuhan Tanal Industrial Co., Ltd.